00197195-02-UG SetupCenter 5.1_en.pdf - 第163页
Setup Verification in Practical Cases Refilling Levels Setup Verification with Waffle Pack Tray Feeders User Guide SIPLACE Setup Center 5.1 16 3 Step 2 Scan in the Ma chine ID barcode of the location to be ver - ified. S…
Setup Verification in Practical Cases
Setup Verification with Random Setup Online Setup Verification with Waffle Pack Tray Feeders
162 User Guide SIPLACE Setup Center 5.1
8.4 Setup Verification with Random Setup
Random Setup gives operators greater configuration flexibility, allowing components to be set up on any
track of the same table or on another table in the line. If SIPLACE Setup Center is running in Random
Setup mode, feeders can be configured during the production process, without the need for a new down-
load of the setup. For example, this enables you to set up spare tracks during ongoing production. These
spare tracks can either be for additional components of the same type or for alternative components.
8.5 Setup Verification with Waffle Pack Tray Feeders
Tray feeders are displayed as follows in the SIPLACE Setup Center (in this example we see an MTC2):
8.5.1 Online Setup Verification with Waffle Pack Tray Feeders
Setup verification of a tray feeder is similar to normal online setup verification.
Using the reader:
Follow the next steps.
► Scan in the machine ID barcode.
► Select "Table check" from the menu.
► The barcode reader display will ask you to scan in the packaging unit barcode label.
► Scan the barcodes one after the other.
► Repeat steps 3 and 4, until all tray feeder levels have been verified.
Errors will be reported in the same manner as those in normal online setup verification.
8.5.2 Refilling Levels
NOTICE
Random Setup
For detailed information about Random Setup, refer to the operating manual for Random Setup,
item no [00196838-xx].
Step 1 (optional)
Scan in the the User if the User registration at the reader
required option has been activated via
Extras Settings
Reader
.
Setup Center
Menu
Setup Verification in Practical Cases
Refilling Levels Setup Verification with Waffle Pack Tray Feeders
User Guide SIPLACE Setup Center 5.1 163
Step 2
Scan in the Machine ID barcode of the location to be ver-
ified.
Step 3
Select the Refill function and click on Enter to confirm.
Step 4
Scanning the tower/level barcode
Step 5a
Depending on the configuration of the barcode rule, the
Component barcode or the unique barcode will be
scanned.
Step 5b (optional)
If additional barcodes have been defined for the packag-
ing unit, they must be scanned consecutively.
Setup Center
Menu
Tablecheck
Missing tracks
Refill
Scan track
Track: 55
Scan component
Info >>
Next barcode
Info >>
Setup Verification in Practical Cases
Setup Verification with Waffle Pack Tray Feeders Spare Tracks on the MTC
164 User Guide SIPLACE Setup Center 5.1
Alternative
Instead of using the machine ID barcode, you can also directly attach the "Refill" control barcode. After
the barcode has been scanned in, Step 4 will begin.
8.5.3 Spare Tracks on the MTC
SIPLACE Pro Desk
The functions for configuring spare tracks in the MTC/WPC need to be activated in the SIPLACE Pro
Desk Setup Editor.
► Start SIPLACE Pro Desk.
► Open the Setup Editor.
► Select the tab for the relevant station.
► Go to the Setup Editor => Random Setup and select the option Arbitrary Level.
Setup Center
Levels marked with an asterisk (2) do not contain a component in the target setup. These levels can be
used as dynamic spare tracks.
After scanning, the data is transmitted to the machine,
Step 5c (optional)
Query for reordering packaging units.
Yes - Information for reordering is saved in the SC data-
base.
No – No information for reordering.
The query only appears if the Enable quantity correction
during refill option has been activated via
Extras Set
-
tings Common
.
Step 6
After the refill, the main menu appears on the reader.
If additional packaging units need to be refilled, the entire
procedure must be repeated.
Recorder
Component?
Yes No
Setup Center
Menu