00197195-02-UG SetupCenter 5.1_en.pdf - 第134页
Working with the Setup Center Application Setup Verification for Partial Setups Stationwise Download 134 User Guide SIPLACE Setup Center 5.1 7.9.2 Stationwise Download SIPLACE Pro permits st ationwise downloads. ► Select…
Working with the Setup Center Application
Download Partial Setups Setup Verification for Partial Setups
User Guide SIPLACE Setup Center 5.1 133
The following diagram shows a production schedule with a selected recipe for a partial setup:
With you can enable and with you can disable the download for the marked line/recipe. The
SIPLACE Line Control Server and Setup Center calculate the required partial setup for all selected rec-
ipes, during downloading.
These pictograms are only possible for manual recipe selection. With you can switch between the
various recipes to be produced (job or production schedule).
Working with the Setup Center Application
Setup Verification for Partial Setups Stationwise Download
134 User Guide SIPLACE Setup Center 5.1
7.9.2 Stationwise Download
SIPLACE Pro permits stationwise downloads.
► Select the function Stationwise Download from the list field (1) on the SIPLACE Line Control GUI.
Result:
Setup Center shows the different setup names (1).
7.9.3 Online Setup Verification
With Setup Center, it is possible verify only parts of a setup. Together with the SIPLACE Line Control
GUI, the line operator can select which recipes are to be produced and, using Setup Center, can subse-
quently verify the components needed in the recipes.
If Setup Center detects the download of a partial setup, this will be marked on the user interface with a
special symbol (1) .
NOTICE
Stationwise Download
For details about "stationwise downloads" refer to the current SIPLACE Pro user guide.
Working with the Setup Center Application
Offline Setup Verification Setup Verification for Partial Setups
User Guide SIPLACE Setup Center 5.1 135
The feeders with components which are not needed in the current partial setup are shown as transparent
on the Setup Center user interface (2). In other words, although these are included in the cluster setup,
they are not needed for the production of this recipe.
7.9.4 Offline Setup Verification
A partial setup can also be defined in the pre-setup area with the help of the SIPLACE Line Control GUI.
The procedure is the same as that for Online setup verification.
► On the SIPLACE Line Control GUI, mark those recipes which you want to verify in the pre-setup ar-
ea, as a partial setup.
► After opening the corresponding setup with the quick start barcode on the Setup Center user inter-
face for offline setup verification, only those tracks needed for the partial setup will be active and
available for verification.
NOTICE
The Line control GUI supports offline mode
The Line Control GUI also supports the offline mode (without Line Control Server connection).
This enables you to also edit a production schedule in the pre-setup area, via the Line Control
GUI.
NOTICE
Recipe data for a cluster setup
Make sure that any previously marked recipe data in a cluster setup, which you have already
sent to the machine, are now no longer marked!
NOTICE
Partial setup in offline area
If one or more recipes are marked for the offline area, in the Line Control GUI and if the corre-
sponding setup is opened for checking in Setup Center, using a quick start barcode, only those
components needed for the marked recipes will be made available for checking. Marked reci-
pes which are in a different setup will not be taken into account.