00197195-02-UG SetupCenter 5.1_en.pdf - 第181页

Setup Verification in Practical Cases Refill Working with X-Feeders User Guide SIPLACE Setup Center 5.1 18 1 8.12.4 Refill Tracks need to be refilled during production. Alternatively, re filling can be d irectly st arted…

Setup Verification in Practical Cases

Working with X-Feeders Setup Verification

180 User Guide SIPLACE Setup Center 5.1

Prerequisites

An X-feeder with a packaging unit is placed on a changeover table which is connected to a docking sta-

tion.

Step-by-Step Procedure (Offline Setup Verification for Track 55):

During online setup in step 3 the machine ID barcode of the location is scanned instead of the setup

verification barcode. Select the Table Check option in the reader menu.

Step 1

The process assumes that the following steps must be

performed

► Scanning the quick start barcode

► Scanning the docking station barcode

► Scanning the changeover table barcode

⇨ The barcode scanner is in verification mode.

Step 2

Press the Set button on the feeder for the track to be

checked.

Step 3

Scan in the Setup Verification barcode of the location to

be verified. You find the barcode in the headline of the

setup report.

Step 4

The selected track is highlighted in Setup Center and

ready for verification. Now the steps for setup verification

already described are executed.

Setup Center

Track: 55

Scan component

Info >>

Setup Verification in Practical Cases

Refill Working with X-Feeders

User Guide SIPLACE Setup Center 5.1 181

8.12.4 Refill

Tracks need to be refilled during production. Alternatively, refilling can be directly started at the X-feeder.

This is explained in the following steps.

Prerequisites:

An X-feeder with a successfully verified packaging unit is set on a changeover table at the machine.

Step 1

Press the Set button on the feeder for the track to be

checked.

Step 2

Scan in the Machine ID barcode of the location to be ver-

ified. Setup Center switches to the selected track.

Step 3

Select the Refill function and click on Enter to confirm.

Step 4

The selected track can now be refilled according to the

steps already described.

Setup Center

Tablecheck

Missing tracks

Refill

Track: 55

Scan component

Info >>

Setup Verification in Practical Cases

Working with X-Feeders Setting Up and Tearing Down X-Feeders

182 User Guide SIPLACE Setup Center 5.1

8.12.5 Setting Up and Tearing Down X-Feeders

Setup Center automatically detects that an X-feeder has been set up on or torn down from a changeover

table in the docking station or machine. This is also possible during board production in the machine.

Setup

The X-feeder is set up on any position on the changeover table. The Setup Center GUI will automatically

show the feeder at the relevant place. When the feeder is set up, the system checks the feeder type. If

an error occurs, the appropriate message will be issued.

Teardown

For the Setup Center, the teardown of an X-feeder means that the connection between the feeder and

the packaging unit is deleted in the database. This can be done both through the Setup Center applica-

tion (context menu for the feeder or Packaging Unit Editor) or directly at the feeder.

Teardown at the feeder is described below:

Teardown in the station

Explanations concerning the X-feeder:

1. Foil rocker in top position: feeder is empty or there is

a torn foil strip.

2. Foil rocker in middle position: Feeder is configured

and ready for operation.

3. Tape cover sheet.

4. Toothed wheels for foil insert.

5. Release switch for foil insert.

6. Button for unlocking the X-feeder

Step 1 (Starting situation)

The feeder is in the ready state.

Step 2

Press the BACKWARDS button of the feeder for at least

2 seconds.

▪ Feeder with LCD display

– The feeder display will show the state Teardown.

▪ Feeder with LCD display

– After 0.75 seconds the pitch display indicates by

a backwards running light that the tear down pro-

cedure is enabled. The BACKWARDS button is

now released.