00193892-0402_AI_FeederCoverFlap_DE+EN.pdf - 第50页
Assembly instructions Feeder cover flap, SIPLACE HF-series / X-series / D3 05/2009 Edition 50 : Reassemble the machinery facing. 2 2 : Screw the left switch to the machine frame Secure the cable with cable clip s. 2
Assembly instructions Feeder cover flap, SIPLACE HF-series / X-series / D3
05/2009 Edition
49
: Run the cable from the switch through the hole in the machine frame.
2
2
: Run the cable through the hole in the machine frame beneath the docking unit up to the back
of the docking unit.
2
2
2
2
2
Cable to the switch
Assembly instructions Feeder cover flap, SIPLACE HF-series / X-series / D3
05/2009 Edition
50
: Reassemble the machinery facing.
2
2
: Screw the left switch to the machine frame
Secure the cable with cable clips.
2
Assembly instructions Feeder cover flap, SIPLACE HF-series / X-series / D3
05/2009 Edition
51
: Remove the cover plate (4 screws).
2
: If an empty tape duct with FS -03 or lower (thread holes dor the fixation of the damper are miss-
ing) is mounted, change it for a new one with FS -04 or higher.
Remove the empty tape guide channel (2 screws).
2
4 screws