00193892-0402_AI_FeederCoverFlap_DE+EN.pdf - 第67页
Assembly instructions Feeder cover flap, SIPLACE HF-series / X-series / D3 05/2009 Edition 67 : T ie the connecting cable in place or to the cab le using cable ties. 2 2 : Push the panel back onto the component pu ll-in …
Assembly instructions Feeder cover flap, SIPLACE HF-series / X-series / D3
05/2009 Edition
66
: Run the switch connecting cable towards the push-on terminal strip.
2
: Plug the connector into the free slot with the locating tab pointing upwards (see top and bottom
photographs).
2
Switch
Plug connectors
Connecting cable
Insert the connector here
Assembly instructions Feeder cover flap, SIPLACE HF-series / X-series / D3
05/2009 Edition
67
: Tie the connecting cable in place or to the cable using cable ties.
2
2
: Push the panel back onto the component pull-in device
: Secure the panel once more by tightening the 2 top screws and 4 bottom screws.
2
2
2
2
2
2
2
2
2
2
2
Secure the connecting cable with cable ties
Assembly instructions Feeder cover flap, SIPLACE HF-series / X-series / D3
05/2009 Edition
68
The connecting cable for the feeder cover flap with jumper can be found with the other connecting
cables. 2
: Remove the jumper.
2
2
: Plug in all the connectors in the correct positions (see photograph below).
: Screw on the grounding.
2
2
2
Remove the jumper
New connector
Grounding