00193892-0402_AI_FeederCoverFlap_DE+EN.pdf - 第72页
Assembly instructions Feeder cover flap, SIPLACE HF-series / X-series / D3 05/2009 Edition 72 : Drill the 3 holes with a 5 mm diameter metal drill bit. : Place the counterbore in the drilled hole and thus drill a la rger…
Assembly instructions Feeder cover flap, SIPLACE HF-series / X-series / D3
05/2009 Edition
71
: Insert the pin into the drilling gauge as follows:
Location 1 + 3: Insert pin on the left,
Location 2 + 4: Insert pin on the right (see photograph).
: Push the drilling gauge (item no.: 03011814-01) on from the outside (in this case from the right)
until the pin lies against the recess.
2
2
2
Pin inserted on the
right, location 2 + 4
Hole for pin, location 1 + 3 Recess: Stop for pin
Drill hole
Drilling gauge in place
(item no.: 03011814-01)
Assembly instructions Feeder cover flap, SIPLACE HF-series / X-series / D3
05/2009 Edition
72
: Drill the 3 holes with a 5 mm diameter metal drill bit.
: Place the counterbore in the drilled hole and thus drill a larger hole (see photograph).
: Carefully deburr the drill hole inside and out.
2
2
2
2
2
2
Assembly instructions Feeder cover flap, SIPLACE HF-series / X-series / D3
05/2009 Edition
73
: Before installing, place the seal around the index ball.
2
2
: Fit the switch for the feeder cover flap in the cover.
2
2
: Fix the side wall in place once more with the four screws on the outside and one on the inside.
Be careful not to damage the connecting cable.
2
2
Seal