00193892-0402_AI_FeederCoverFlap_DE+EN.pdf - 第63页
Assembly instructions Feeder cover flap, SIPLACE HF-series / X-series / D3 05/2009 Edition 63 : Attach the drilling gauge as shown in the photograph. 2 The drilled hole must be sele cted to suit the location: 2 2 Drillin…
Assembly instructions Feeder cover flap, SIPLACE HF-series / X-series / D3
05/2009 Edition
62
: Unscrew any bolts from the panel so that you can attach the drilling gauge.
2
2
: Unclip these two switches.
2
Bolts
Screw
Two switches
Assembly instructions Feeder cover flap, SIPLACE HF-series / X-series / D3
05/2009 Edition
63
: Attach the drilling gauge as shown in the photograph.
2
The drilled hole must be selected to suit the location: 2
2
Drilling gauge (item no.: 03033936-01)
Partition in the side panel
Drill hole for
locations 1 and 3
Drill hole for
locations 2 and 4
Assembly instructions Feeder cover flap, SIPLACE HF-series / X-series / D3
05/2009 Edition
64
: Drill 1 hole with a 5 mm diameter metal drill bit.
2
: Place the counterbore in the drilled hole and thus drill a larger hole (see photograph).
: Carefully deburr the drill hole inside and out.
2
2