3OM-1751-002w_G5S.pdf - 第158页

3OM-1751 1-104 1303-001 7. "MaintWM" Window Note The setting for sending the maintenance warning message is performed using the NT -100 system software. Reference Refer to "4.10 Maintenance WM" in Cha…

100%1 / 268
3OM-1751
1-1031303-001
6.5.2 "Setup Log" Tab Sheet
Displayed are the setup logs.
F3A84
Detailed Display
Displayed are the setup logs of the machine.
6.5 "PRGM.INFO." Window
Graphic
Development
3OM-1751
1-1041303-001
7. "MaintWM" Window
Note
The setting for sending the maintenance warning message is performed using
the NT-100 system software.
Reference
Refer to "4.10 Maintenance WM" in Chapter 2 in the "NT System Software"
Instruction Manual.
This menu is used to manage the periodic maintenance timing.
The timing for the oiling check or maintenance and inspection can be conrmed
in the window and also the maintenance and inspection timing is notied in the
"Mach Info" window.
For the maintenance items described in Volume 4, the "Maintenance Timing" data
is notied to the maintenance operator using the "Operator Message" or in the
"Mach Info." window.
[1]
[2]
"MaintWM" Window F3A85
7. "MaintWM" Window
Graphic
Development
3OM-1751
1-1051303-001
[1] Tabs
This "MaintWM" window is provided with the following Five tabs.
When each tab is pressed, the corresponding tab sheet appears.
Tabs Description
List
The corresponding tab sheet enables the operator to display the
present status for the oiling check-up, maintenance check-up and
designated check-up, as a list.
Oil
In this tab sheet the practice dates for the maintenance cycles (weekly,
monthly, every three months, every six months and every 365 days)
of the oiling check are displayed.
Upkeep
The corresponding tab sheet enables the operator to display the
setting status and present status for the nozzle, lter #1 (head lter)
and lter #2 (lter for air supply).
"Elapsed operation period" or "No. of picked-up components" can
be setup as the announcement condition. When the value reaches the
set value for either of the above two conditions, the announcement is
issued.
Design
The corresponding tab sheet enables the operator to display the
setting status and present status for the additionally set maintenance
check-up items (Maintenance 1, Maintenance 2 or Maintenance 3 for
maintenance announcements.)
"Elapsed operation period" or "No. of picked-up components" can
be setup as the announcement condition. When the value reaches the
set value for either of the above two conditions, an announcement is
issued.
Feeder
The corresponding tab sheet enables the operator to display the feeder
setting status and present status.
The No. of shots is setup for each of the feeder types (four types),
and the value reaches the set value, an announcement is issued. Also,
the current No. of shots can be cleared.
T3A15
[2] Tab Sheet Display Section
The corresponding tab sheet to the selected tab is displayed in this section.
As the initial display, the "List" tab sheet appears.
7. "MaintWM" Window