3OM-1751-002w_G5S.pdf - 第87页
3OM-1751 1-33 1303-001 [2] T eaching Procedure Display Area Displayed are the buttons to be used for the teaching operations. Select head Each head in the graphic image of the machine is provided with a button function. …
3OM-1751
1-321303-001
5.1 "NL-Axis Org Master Noz Lv" Window
This window enables the operator to perform the teaching on the offsets to correct
the difference in level between the nozzle up/down mechanism and the nozzle
roller to avoid the impact given to the component in the NL-axis rotation.
[2]
[1]
F3A24
[1] Teaching Data Display Section
Displayed are each offset data for the designated head.
Note
When the multi-functional head has been selected, they are not displayed.
NL-Axis Org
The nozzle level is measured using the line sensor and based on the data
read after the NL-axis is moved to four positions, the NL-axis origin offset is
calculated automatically.
Before
: Shows the value before the teaching
After
: Shows the resultant value after the teaching
Master Noz Lv
Displayed is the offset data (L Up/Down (mm)) for the designated nozzle.
Before
: Shows the value before the teaching
After
: Shows the resultant value after the teaching
Graphic
Development
5.1 "NL-Axis Org Master Noz Lv" Window
3OM-1751
1-331303-001
[2] Teaching Procedure Display Area
Displayed are the buttons to be used for the teaching operations.
Select head
Each head in the graphic image of the machine is provided with a button
function. When a button is pressed, the corresponding head is selected as an
object one for the teaching operation.
[Noz] Button
Using this function, the nozzle for which the teaching is preformed, is
designated.
When the [Noz] button is pressed, the input window appears.
[Noz place. pos. move] Button
When pressed, this button rotates the turret such that the specied nozzle can
be located in front of you, making it easier for you to attach or detach the
nozzle.
[Teach Start] Button
When pressed, this button executes the teaching operation.
[Save] Button
When this button is pressed, the teaching results are saved.
·
Teaching Procedure
Procedure
(1) Select the Head (1 or 2) for which the teaching is performed.
(2) Press the [Noz] button and select the nozzle No. (from 1 through 15) in the
[Noz] selection window.
(3) Press the [Noz place. pos. move] button to attach the master nozzle.
(4) Press the [Teach Start] button.
(5) Press the [Save] button.
5.1 "NL-Axis Org Master Noz Lv" Window
3OM-1751
1-341303-001
5.2 "Pick-up Lv NozStkLv Set" Window
This window enables the operator to input the offset data to correct the deviation
from the feeder setup position, out of the offset data items related to the
component loading operation to the tape feeder on the feeder base.
[1]
[2]
[3]
[4]
F3A25
[1] Head Up Down L [mm]
Head 1 and Head 2
Displayed are the offset values in head up/down operation for each head.
[2] Fdr L [mm]
The offset values for each feeder are entered in this area.
When the [Clear] button is pressed, the previous values before the data entry
are returned.
[3] NozStk L [mm]
The offset values for each stocker are entered in this area.
When the [Clear] button is pressed, the previous values before the data entry
are returned.
[4] [Save] Button
When this button is pressed, the input offset values are saved.
Graphic
Development
5.2 "Pick-up Lv NozStkLv Set" Window