3OM-1751-002w_G5S.pdf - 第178页
3OM-1751 2-10 Xm(+) Ym(+) Component Recognition Camera Head Rotational Center Standard Mark Center of PEC Recognition Camera Pm. Machine Reference Coordinate Origin Standard Mark Center of PEC Recognition Camera Componen…
3OM-1751
2-91303-001
2.1.5 "Mark Offset" Tab Sheet
F3B9
"Mark (Center)" represents the standard mark position captured by the PEC
recognition camera when the rotational center of the head is moved to the area
above the component recognition camera.
"Mark (Right)" and "Mark (Left)" are the standard mark positions captured by the
PEC recognition camera when the pertinent nozzle is moved to the center of the
component recognition camera with the head being rotated 90° or 270°.
Graphic
Development
2.1 "Device Offset" Window
3OM-1751
2-10
Xm(+)
Ym(+)
Component Recognition
Camera
Head Rotational Center
Standard Mark
Center of PEC Recognition
Camera
Pm. Machine Reference
Coordinate Origin
Standard Mark
Center of PEC Recognition
Camera
Component Recognition
Camera
Head Rotational Center
F3B10
1303-001
2.1 "Device Offset" Window
3OM-1751
2-111303-001
2.1.6 "Teach Plate" Tab Sheet
[1]
F3B11
[1] Head 1 and Head 2
X (Horizontal), Y (Vertical), and L (Height) [mm]
Enter the parameters required to adjust the deviations based on the design
position of the jig depot.
Graphic
Development
2.1 "Device Offset" Window