3OM-1751-002w_G5S.pdf - 第180页
3OM-1751 2-12 1303-001 2.1.7 "Line Sensor" T ab Sheet [1] F3B12 [1] Head 1 and Head 2 Set the number of dirt detection scanning times to be conducted by the linear measure sensor of each head. Graphic Developme…
3OM-1751
2-111303-001
2.1.6 "Teach Plate" Tab Sheet
[1]
F3B11
[1] Head 1 and Head 2
X (Horizontal), Y (Vertical), and L (Height) [mm]
Enter the parameters required to adjust the deviations based on the design
position of the jig depot.
Graphic
Development
2.1 "Device Offset" Window
3OM-1751
2-121303-001
2.1.7 "Line Sensor" Tab Sheet
[1]
F3B12
[1] Head 1 and Head 2
Set the number of dirt detection scanning times to be conducted by the linear
measure sensor of each head.
Graphic
Development
2.1 "Device Offset" Window
3OM-1751
2-13
1303-001
2.1.8 "Shuttle conveyor" Tab Sheet
F3B13
Note
This setting is used as an option.
Graphic
Development
2.1 "Device Offset" Window