3OM-1751-002w_G5S.pdf - 第229页
3OM-1751 2-61 1303-001 Mag. X (Horizontal) and Y (V ertical) [0.01 µm/pixel] Set how many micrometers should be equivalent to one pixel to specify the magnication of the PEC recognition camera. The parameters are automa…
3OM-1751
2-601303-001
Set the following offset values for each camera.
[1] PCB Recog Cam
The set parameters are used to adjust the horizontal tilt of the PEC
recognition camera.
Z (Angle) [deg]
Set the parameters representing the angular deviations in the scanning
coordinates of the PEC recognition cameras based on the machine reference
X/Y coordinates (Xm-Ym).
When the camera scanning coordinates are shifted counterclockwise to the
machine reference X/Y coordinate system, a plus sign must be afxed to
each offset data.
Xm(+)
Ym(+)
Yc(+)
Xc(+)
Yc(+)
Xc(+)
Angle of PEC Recognition Camera
Xm-Ym
Xc-Yc
Angle of PEC Recognition Camera
Pm. Machine Reference
Coordinate Origin
: Machine Reference
Coordinate System
: PEC Recognition
Coordinate System
F3B60
2.8 "PCB Recog" Window
3OM-1751
2-611303-001
Mag. X (Horizontal) and Y (Vertical) [0.01 µm/pixel]
Set how many micrometers should be equivalent to one pixel to specify the
magnication of the PEC recognition camera.
The parameters are automatically calculated through teaching operations
performed using the magnication measurement jig.
•
Default : 2500
Contrast and Brightness
The brightness of the image captured by the PEC recognition camera can be
adjusted.
•
Defaults
Contrast
: 102
Brightness
: 128
Note
(a) The larger the value for "Contrast" is, the stronger the chromaticness
becomes.
(b) The larger the value for "Brightness" is, the brighter the whole view
becomes.
[2] PCB Recog Light
Ring Light, Coaxial Light
Set the light level for PCB Recog Light.
•
Defaults
Ring Light
: 20
Coaxial Light
: 30
2.8 "PCB Recog" Window
3OM-1751
2-621303-001
2.9 "Comp. Recog" Window
[1]
[2]
[4]
[3]
F3B61
[1] Offset select tab
When this button is pressed, the offset data for the selected tab is displayed.
[2] Offset Data Display Section
In this section, the offset data selected in step [1] is displayed.
[3] [Save] button
When this button is pressed, the input data is saved.
[Cancel] button
When this button is pressed, the input data is cancelled and the save data is
returned.
[4] [Return] button
When this button is pressed, the "Offset Data" window is returned.
2.9 "Comp. Recog" Window
Graphic
Development