3OM-1751-002w_G5S.pdf - 第226页
3OM-1751 2-58 1303-001 2.7.1 1-1 to 1-4, 2-1 to 2-4 When the [Nozzle Stocker] tab is pressed on the "Offset Data" tab sheet and the [1-1] tab is pressed, the following tab sheet appears. Note (a) The same tab s…
3OM-1751
2-571303-001
2.7 "Nozzle Stocker" Window
[3]
[2] [1]
F3B56
[1] Offset button
When this button is pressed, the offset data for the selected tab is displayed.
Note
When the
[Stocker Master]
button is pressed, the set values of 1-1
through 1-4 and 2-1 through 2-4 are displayed.
[2] Offset Data Display Section
In this section, the offset data selected in step [1] is displayed.
[3] [Save] button
When this button is pressed, the input data is saved.
[Cancel] button
When this button is pressed, the input data is cancelled and the save data is
returned.
2.7 "Nozzle Stocker" Window
Graphic
Development
3OM-1751
2-581303-001
2.7.1 1-1 to 1-4, 2-1 to 2-4
When the [Nozzle Stocker] tab is pressed on the "Offset Data" tab sheet and the
[1-1] tab is pressed, the following tab sheet appears.
Note
(a) The same tab sheet appears from [1-2] to [2-4].
(b) The tab sheet may look different, depending on which options are selected.
[1]
[2]
F3B57
[1] X (Horizontal) and Y (Vertical) [mm]
This offset data is used to adjust the nozzle change position deviation from
the nozzle stocker unit position designed value based on the PCB locating
base XY coordinates (Machine Reference XY Coordinates: Origin P0).
The Machine Reference XL Coordinates are set to the reference values.
When positive (+) value is set for the offset value, the nozzle change position
is changed to directions X(+) and Y(+).
[2] L (Height) [mm]
When a value is entered with a plus (+) sign, the nozzle change position
(height) is changed in the L (+) direction, concluding that the descending
stroke has increased.
Nozzle
Nozzle Mounting Level
(Upper Surface of Nozzle Stocker Block)
L(+)
F3B58
Note
The above "L" is effective only in the master nozzle.
2.7 "Nozzle Stocker" Window
Graphic
Development
3OM-1751
2-591303-001
2.8 "PCB Recog" Window
[1]
[2]
F3B59
2.8 "PCB Recog" Window
Graphic
Development