00198442-01_UM_TX-V2_EN.pdf - 第15页
User manual SIPLACE TX V2 1 Introduction From software version 711.1 04/2018 1.1 Important notes on the user manual 15 All the menus and other info rmation are availabl e in two languages: Y ou can choose between the Ger…
1 Introduction User manual SIPLACE TX V2
1.1 Important notes on the user manual From software version 711.1 04/2018
14
1.1.2 Danger notes
1
1.1.3 Manufacturer's/supplier's liability
We hereby confirm that the contents of this user manual are of a descriptive and explanatory na-
ture only and do not contain any contractual conditions or guaranties. The liability and obligations
assumed by ASM Assembly Systems GmbH&Co.KG can be found exclusively in the relevant
contract agreement concerning the supply of the placement machine described in this manual.
This applies in particular to all statements regarding performance or service life and the agreed
liability for faults or defects. The provisions of the contract regarding the liability for faults or defect
are neither extended nor restricted by any statements in this user manual.
1.1.4 Revision table
1
1.1.5 Further information about and contents of the documentation package
1.1.5.1 How to get information
If you have any further questions concerning this manual or if you would like additional information
on a particular topic, please get in touch with your local SIPLACE dealer or contact us directly at:
ASM Assembly Systems GmbH&Co.KG
Rupert-Mayer-Str. 44
81379 Munich 1
1.1.5.2 SIPLACE on the World Wide Web (WWW)
We also have our own site on the Internet. Why not log into our homepage at http://www.asm-smt-
solutions.com.
WARNING
Read the user manual!
Tasks may only be performed by qualified staff who have completed the relevant
training.
Only perform tasks on the placement machine if you have precise knowledge of the
relevant section in the user manual.
Observe all warnings, caution notes and hazard notes.
Please also read chapter 2 of this user manual through carefully.
Edition Amendments
04/2018 First edition
User manual SIPLACE TX V2 1 Introduction
From software version 711.1 04/2018 1.1 Important notes on the user manual
15
All the menus and other information are available in two languages: You can choose between the
German and English versions.
The various headings contain information on
– Our products
– Services
– Contacts, etc.
Registered customers can also access the SIPLACE User Group. There you can call up special
information on our placement machines, such as
– Technical documentation
– Technical information
– Spare parts catalogs etc.
Registering for access to the User Group is easy:
Click on ’Register now’.
Complete the registration form and just send it off.
You will then quickly receive access authorization with USER ID and a password.
1 Introduction User manual SIPLACE TX V2
1.1 Important notes on the user manual From software version 711.1 04/2018
16
1.1.6 Abbreviations
1
A-Placement Alternating Placement
PA Placement area
CO Component
C&P20 P2 High-performance Collect&Place head with 20 segments, SIPLACE SpeedStar
CPP Collect&Place head, SIPLACE MultiStar
DCA Direct chip attach
DC Dual conveyor
EDIF Energy and data interface
ESD Electrostatically-sensitive group of components
EMC Electromagnetic compatibility
ESD Electrostatic sensitive device
FC Flip chip
WT Waffle pack tray
WTC Waffle pack tray carrier
MGCU Modular Gantry Control Unit
GND Ground
MHCU Modular Head Control Unit
I-Placement Independent placement
JTF-ML JEDEC Tray Feeder
PCB Printed circuit board
MCS Machine capability study
P&P Pick&Place
P&P1 Pick&Place module 1
P&P2 Pick&Place module 2
NC Nozzle changer
SMD Surface mounted device
SC Station computer
TH Twin Pick&Place head, SIPLACE TwinStar
VS Vision system