00198442-01_UM_TX-V2_EN.pdf - 第45页
User manual SIPLACE TX V2 2 Operational safety From software version 711.1 04/2018 2.2 Warning labels 45 2.2.4.2 W arning label W 204-CN 2 W 204 in fig. 2.2 - 4 , pag e 38 , 2.2 - 5 , page 39 and 2.2 - 6 , p age 40 item …
2 Operational safety User manual SIPLACE TX V2
2.2 Warning labels From software version 711.1 04/2018
44
2.2.3.9 Attachment points for transportation with pallet truck or fork-lift
1 in fig. 2.2 - 1, page 35, item no. 03155590-01 or
1 in fig. 2.2 - 4
, page 38, item no. 03155590-01
(Quantity per placement machine: 2)
2.2.4 Meaning and description of warning labels (label for China)
The following labels for Chinese customers look different to the standard labels (rest of world).
2.2.4.1 Warning label W 210-CN
2
Item W 210-CN in fig. 2.2 - 4, page 38 and 2.2 - 5, page 39, item no. 03149080-01
(Quantity per placement machine: 2)
0
0
0
Attachment points for transportation with pallet truck or fork-lift
The placement machine may only be lifted and transported at
these marked points.The placement machine could otherwise tilt
over.
The placement machine may ONLY be lifted and transported
at these marked points (on the output end of the placement
machine). Read and observe the chapter "Setting up and
commissioning" on page 155.
2
2
2
2
2
2
Warning label on the EMERGENCY STOP button
User manual SIPLACE TX V2 2 Operational safety
From software version 711.1 04/2018 2.2 Warning labels
45
2.2.4.2 Warning label W 204-CN
2
W 204 in fig. 2.2 - 4, page 38, 2.2 - 5, page 39 and 2.2 - 6, page 40 item no. 03149290-01
(Quantity per placement machine: 6)
2.2.4.3 W 004-CN
2
Item W 004-CN in fig. 2.2 - 4, page 38, item no. 03155348-01
(Quantity per placement machine: 1)
2
2
2
Warning about hand injuries
Reaching in here can lead to injuries to the arms and hands.
Do not reach into the running placement machine.
Do not reach into the inside of the adjacent machine.
0
2 Operational safety User manual SIPLACE TX V2
2.2 Warning labels From software version 711.1 04/2018
46
2.2.5 Hand guard on the board conveyor
The hand guard on the PCB conveyor prevents you from reaching into the placement machine, in
the event that there is no input/output conveyor extension fitted.
The hand guard is fitted to the input and output conveyors, as a default.
2
Fig. 2.2 - 7 Hand guard on the SIPLACE TX V2 placement machine (location 2)
(1) Hand guard
2
Adjust the height of the hand guard (metal sheet inside and outside) so that the board with
the components can be transported safely through the conveyor system.
2
WARNING
Danger of crushing
If the hand guard is not fitted, reaching into the board conveyor could lead to injuries to
the arms and hands.
The operating company is responsible for ensuring that the hand guard is fitted.
Only operate the SIPLACE TX V2 placement machine if the hand guard has been
fitted to the input and output conveyor.
PLEASE NOTE
Observe the maximum height of the board with the highest component.
(1)