00198442-01_UM_TX-V2_EN.pdf - 第292页
7 Maintenance User manual SIPLACE TX V2 7.1 Safety instructions for main tenance work From software versi on 711.1 04/2018 296
User manual SIPLACE TX V2 7 Maintenance
From software version 711.1 04/2018 7.1 Safety instructions for maintenance work
295
7
7
7
7.1.1 Safety instructions for hazardous substances
7
CAUTION
Cleaning and lubrication
Do not use any solvents for cleaning, use only ethanol!
Alternatively, you can also use isopropanol – IPA.
Cleaning with compressed air inside the placement machine or module assemblies
is expressly prohibited.
CAUTION
Risk of cutting at IC and FC camera
The edges of the mirror could cut your fingers.
Protect yourself by wearing laboratory gloves and avoid touching the edges.
Laboratory gloves are also a prerequisite for effective cleaning (fingerprints!).
CAUTION
Only one person may be in the area of the location at any one time.
The reason for this is to ensure the safety of the operating personnel or of a second per-
son. The two-hand operation of the component trolley insert only enables one person to
be reliably protected from danger.
CAUTION
Observe the safety data sheets
When handling hazardous substances, (e.g. Loctite 241, ethanol) observe the ap-
plicable safety data sheet.
7 Maintenance User manual SIPLACE TX V2
7.1 Safety instructions for maintenance work From software version 711.1 04/2018
296
User manual SIPLACE TX V2 Index
04/2018
293
Index
Symbols
"Head crash" label
. . . . . . . . . . . . . . . . . . . . . . .59
"Switching on the SIPLACE line" flow chart
. . .207
A
Abbreviations
. . . . . . . . . . . . . . . . . . . . . . . . . . .16
adapting the component trolley to the PCB conveyor
height
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .193
Adjusting the empty tape duct to the component
height
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .195
Advanced production
. . . . . . . . . . . . . . . . . . . .199
air cushion transport system
. . . . . . . . . . 185, 189
Alert
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217
alert information, colors
. . . . . . . . . . . . . . . . . . .221
ambient conditions
Ambient pressure
. . . . . . . . . . . . . . . . . . . . .98
Ambient pressure
. . . . . . . . . . . . . . . . . . . . . . . .98
A-Placement
. . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Assembly position for the stationary cameras
IC and FC camera
. . . . . . . . . . . . . . . . . . .137
Assembly positions of MultiStar in the placement
machine
. . . . . . . . . . . . . . . . . . . . . . . . . . .117
assembly positions of SIPLACE MultiStar
. . . .116
Atmospheric humidity
. . . . . . . . . . . . . . . . . . . . .98
authorized employees.
. . . . . . . . . . . . . . . . . . . .91
Automatic width adjustment
. . . . . . . . . . . . . . .132
Avoiding track errors
. . . . . . . . . . . . . . . . . . . . .246
B
basic view
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .212
buttons
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
C
C&P component camera, type 30, 27 x 27, digital
.
137
C&P20 P2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Intermediate distribution board
. . . . . . . . . .108
Connection for the holding circuit
. . . . . . . .108
Description
. . . . . . . . . . . . . . . . . . . . . . . . .109
DP drive
. . . . . . . . . . . . . . . . . . . . . . . . . . .108
Handle
. . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Nozzle
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Pressure control valve
. . . . . . . . . . . . . . . 108
Return cylinder
. . . . . . . . . . . . . . . . . . . . . 108
Star motor
. . . . . . . . . . . . . . . . . . . . . . . . . 108
Technical data
. . . . . . . . . . . . . . . . . . . . . 109
Z motor
. . . . . . . . . . . . . . . . . . . . . . . . . . . 108
calibrate machine
. . . . . . . . . . . . . . . . . . . . . . 213
carrying out a setup check
. . . . . . . . . . . . . . . 227
Carrying out a sight check
. . . . . . . . . . . . . . . . 229
Center of gravity
. . . . . . . . . . . . . . . . . . . . . . . 105
centering bar for holding the "back" centering pin for
X feeder module
. . . . . . . . . . . . . . . . . . . . 151
Centering holes, changeover table SIPLACE TX
.
151
, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Centering pin, changeover table SIPLACE TX
152
Changing the setup
. . . . . . . . . . . . . . . . . . . . . 244
Printing out the conversion instructions before
changing the setup
. . . . . . . . . . . . . . . . . . 245
replacing the feeder modules
. . . . . . . . . . 245
charging, static
. . . . . . . . . . . . . . . . . . . . . . . . . 92
check functions
. . . . . . . . . . . . . . . . . . . . . . . . 213
check sensors
. . . . . . . . . . . . . . . . . . . . . . . . . 213
Check the X feeder module before using it
. . . 234
Checking a delivery
. . . . . . . . . . . . . . . . . . . . . 164
Checking the compressed air supply
. . . . . . . 167
closing the protective covers, safety instructions
63
CO
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
color coded markings
. . . . . . . . . . . . . . . . . . . 217
color coding in the alert information
. . . . . . . . 221
color-coding
. . . . . . . . . . . . . . . . . . . . . . . . . . . 217
Commissioning the placement machine
. . . . . 155
Component camera for the TwinStar, FC camera
283
Component camera, stationary P&P, type 33, 55 x
45, digital
. . . . . . . . . . . . . . . . . . . . . . . . . 137
Component dimensions
. . . . . . . . . . . . . . 286
Component range
. . . . . . . . . . . . . . . . . . . 286
Field of vision
. . . . . . . . . . . . . . . . . . . . . . 286
Illumination type
. . . . . . . . . . . . . . . . . . . . 286
Min. ball diameter
. . . . . . . . . . . . . . . . . . . 286
Min. ball pitch
. . . . . . . . . . . . . . . . . . . . . . 286
Min. lead pitch
. . . . . . . . . . . . . . . . . . . . . 286
Min. lead width
. . . . . . . . . . . . . . . . . . . . . 286
technical data
. . . . . . . . . . . . . . . . . . . . . . 286