00198442-01_UM_TX-V2_EN.pdf - 第284页

6 Station extensions Use r manual SIPLACE TX V2 6.7 Stationary came ras From software version 711.1 04/2018 288 6.7.1.2 T echnical dat a 6 Component dimen sions 0.2 mm x 0.2 mm up to 16 mm x 16 mm for single component me…

User manual SIPLACE TX V2 6 Station extensions

From software version 711.1 04/2018 6.7 Stationary cameras

287

6.7 Stationary cameras

6.7.1 Stationary P&P component camera (type 25) 16 x 16, digital (FC camera)

Item no. 00588101-xx Stationary camera for the Twin head, type

Fig. 6.7 - 1 Stationary P&P component camera (type 25) 16 x 16, digital (FC camera)

(1) Camera housing with integral camera and camera amplifier

(2) Glass plate - illumination and lens levels below

6.7.1.1 Safety instructions

(1)

(2)

WARNING

Risk of collisions!

When changing the placement head from a TwinStar/VHF to a SpeedStar, the SpeedStar

collides with the camera housing.

 Dismantle the stationary component camera for the TwinStar.

 When changing the placement head from a TwinStar to a MultiStar, the stationary

component camera is fitted in the bottom position.

6 Station extensions User manual SIPLACE TX V2

6.7 Stationary cameras From software version 711.1 04/2018

288

6.7.1.2 Technical data

Component dimensions 0.2 mm x 0.2 mm up to 16 mm x 16 mm for single component

measurement

Component range 0402 to SO, PLCC, QFP, sockets, plugs, BGA, special components,

bare dies, flip-chips, shields

Min. lead pitch 0.25 mm

Min. lead width 0.1 mm

Min. ball pitch 0.14 mm

Min. ball diameter 0.08 mm

Field of vision 19.4 mm x 19.4 mm

Illumination type Front-illumination (6 levels, programmable as required)

User manual SIPLACE TX V2 6 Station extensions

From software version 711.1 04/2018 6.7 Stationary cameras

289

6.7.2 Stationary P&P component camera (type 33) 55 x 45, digital (IC camera)

Item no. 00588100-xx Stationary camera fore the CPP head /TH, type 33

Fig. 6.7 - 2 Structure for the stationary P&P component camera, type 33, 55 x 45, digital