00198442-01_UM_TX-V2_EN.pdf - 第97页

User manual SIPLACE TX V2 3 Technical data and assemblies From software version 711.1 04/2018 3.1 Performance data 97 3.1.3 PCB conveyor dat a for SIPLACE TX1/TX2/TX2i 3 Dual con veyor (st andard) Dual conveyor in "…

100%1 / 304
3 Technical data and assemblies User manual SIPLACE TX V2
3.1 Performance data From software version 711.1 04/2018
96
3.1.2 Placement capacity SIPLACE TX
3
Placement head types SIPLACE SpeedStar (C&P20 P2)
SIPLACE MultiStar (CPP)
SIPLACE TwinStar (TH)
Placement performance
For a definition of placement performance values, see section 3.1.1 on page 95.
SIPLACE TX2i placement
machine
Placement area IPC value Benchmark value
C&P20 P2 / C&P20 P2 79,000 96,000
CPP_L/CPP_L 46,000 51,000
SIPLACE TX2 placement
machine
Placement area IPC value Benchmark value
C&P20 P2 / C&P20 P2 72,300 85,500
C&P20 P2 / CPP_L 57,800 66,600
CPP_L/CPP_L 43,300 47,700
CPP_H / CPP_H 40,800 44,700
TH / CPP_H 25,500 29,000
SIPLACE TX1 placement
machine
Placement area IPC value Benchmark value
C&P20 P2 36,100 44,000
CPP_H 20,500 22,500
TH 5,050 5,500
CPP_H = Multistar CPP in high assembly position
CPP_L = Multistar CPP in low assembly position
User manual SIPLACE TX V2 3 Technical data and assemblies
From software version 711.1 04/2018 3.1 Performance data
97
3.1.3 PCB conveyor data for SIPLACE TX1/TX2/TX2i
3
Dual conveyor
(standard)
Dual conveyor in
"single conveyor"
(optional) mode
Board dimensions
(width
*a
x length)
*)a When using board widths > 375 mm, make sure that the peripheral modules can also process these
board widths.
45 mm x 50 mm to
260 mm x 375 mm
45 mm x 50 mm to
460 mm x 375 mm
Stationary conveyor side Outer /outer
Right / right
Left / left
Outside
Automatic electrical width adjust-
ment
Standard
PCB thickness
Standard 0.3 mm to 4.5 mm
PCB warpage See page 133
PCB weight
*b
Standard
*)b The board weight value refers to the weight of the board plus the weight of the components.
Max. 2.0 kg Max. 2.0 kg
Clearance on PCB underside 33 mm
PCB conveyor height
Option
Standard
Option SMEMA
900 mm
930 mm
950 mm
Type of interface SMEMA or The Hermes Standard
Component-free PCB handling
edge
3 mm
PCB changeover time
Dual conveyor 1,3 seconds
*c
0 seconds
*d
*)c With the "Convoy Mode" option. Without this option 1.8 seconds.
*)d 0 seconds in asynchronous mode
3 Technical data and assemblies User manual SIPLACE TX V2
3.2 Ambient conditions and connection values From software version 711.1 04/2018
98
3.1.4 Component supply
3.2 Ambient conditions and connection values
3.2.1 Ambient conditions for packaging, transportation and storage
3
3.2.2 Environmental conditions for operation
3
Component supply Tracks occupied
SIPLACE TX
With C&P20 P2
With CPP
With CPP /TH
With CPP or TwinHead and JTF-ML at location 1
38 feeder modules, each with 8mm X
40 feeder modules, each with 8 mm X
40 feeder modules, each with 8 mm X
28 feeder modules, each with 8 mm X
Technical data
Tape reel diameter to 330.2 mm (13")
Component trolley changeover time < 1 minute
Temperature range Between -25°C and 55°C
Atmospheric humidity Up to 95%
Ambient pressure Up to 3000 m height without pressure equalization
Room temperature
SIPLACE TX
Between 15°C and 35°C
Atmospheric humidity 30% to 75%
(on average not higher than 45%, so that there is no risk of
condensation on the placement machine.)
Ambient pressure > 750 mbar (corresponds to 1700 m above mean sea level)