00198442-01_UM_TX-V2_EN.pdf - 第70页
2 Operational safety Use r manual SIPLACE TX V2 2.5 Safety features From software version 711.1 04/2018 70 2.5 Safety features 2.5.1 Protective covers The trave l range of the gantrie s is covered with two m ovable prot …
User manual SIPLACE TX V2 2 Operational safety
From software version 711.1 04/2018 2.4 Safety instructions for operation
69
2.4.11 Safety instructions for emptying the waste tape container
The waste tape container must be pulled out of the component trolley for emptying. There is a risk
of catching your thumbs as you do so. To prevent this, observe the safety instructions in section
5.8.2
, page 230.
2 Operational safety User manual SIPLACE TX V2
2.5 Safety features From software version 711.1 04/2018
70
2.5 Safety features
2.5.1 Protective covers
The travel range of the gantries is covered with two movable protective covers. The protective
hoods and covers serve as protective devices which prevent unauthorized access to the inside of
the placement machine.
2
2
Fig. 2.5 - 1 Protective covers
(1) Protective cover location 1
(2) Protective cover location 2
(T) Direction of travel
CAUTION
Risk of damage!
The protective covers and other covers could be damaged if too much force is exerted.
Do not stand on or climb up the protective covers and other covers.
(1)
(2)
User manual SIPLACE TX V2 2 Operational safety
From software version 711.1 04/2018 2.5 Safety features
71
Function 2
If one of the protective covers is opened upwards, the power supply to the gantry axes will be im-
mediately interrupted. The gantry axes stop moving. The message "Close cover" is displayed on
the screen.
Close the protective covers and press the START button (item 2 in fig. 2.5 - 2), to continue
placement.