00198442-01_UM_TX-V2_EN.pdf - 第271页

User manual SIPLACE TX V2 6 Station extensions From software version 711.1 04/2018 6.1 Nozzle changer 275 6.1.4.4 Assembly The nozzle changer is fixed to the COT insert. 6 Fig. 6.1 - 13 Assembly position (1) Marking hole…

100%1 / 304
6 Station extensions User manual SIPLACE TX V2
6.1 Nozzle changer From software version 711.1 04/2018
274
6.1.4.3 Configuration example with SIPLACE TwinStar
Location 1 can accommodate a nozzle changer with eight magazines for the TwinStar (item 1 in
fig. 6.1 - 12
, page 274).
6
Fig. 6.1 - 12 Position of nozzle changer for the TwinStar - configuration example of SIPLACE TX2
6
NC CPP
Nozzle changer for the CPP with 4 magazines
COT 40 In
Component trolley in the innermost position
COT 40 Out
Component trolley in the outermost position
IC
Stationary camera
NC TH
Nozzle changer for the TwinStar
User manual SIPLACE TX V2 6 Station extensions
From software version 711.1 04/2018 6.1 Nozzle changer
275
6.1.4.4 Assembly
The nozzle changer is fixed to the COT insert.
6
Fig. 6.1 - 13 Assembly position
(1) Marking hole
(2) Operator side
(3) Arrow pointing toward the PCB conveyor
6
Align the nozzle changer so that the marking hole (item 1) is on the left, as viewed by the op-
erator.
(1)
(2)
(3)
6 Station extensions User manual SIPLACE TX V2
6.1 Nozzle changer From software version 711.1 04/2018
276
6.1.4.5 special nozzles
The SIPLACE placement machine processes components according to the standard SMT spec-
trum.
ASM is continually developing special nozzles.
Special nozzles are available for all placement heads in order to process placement jobs with max-
imum speed, precision and flexibility. The use of automatic nozzle changers also reduces the
setup times that occur at a product change.
For the production of special magazines and grippers, again contact ASM.