00190802-02.pdf - 第30页
1 Hardware / Software Installati o n User’s Manu al Line Computer UNIX 1.2 Hardware Installation Software Version 402.xx Edition 06/ 96 1 - 16 Settin g color temperatu re ● Select c olor temper ature 93 (9300K ) or 65 (6…
User’s Manual Line Computer UNIX 1 Hardware / Software Installation
Software Version 402.xx Edition 06/96 1.2 Hardware Installation
1 - 15
Correcting distortions
●
Select abbreviation
GC
(Geometry Correction).
●
Press the CONFIRM button.
The second level of the OSD menu will be displayed.
Correcting trapezium distortion
●
Select symbol .
●
Press the CONFIRM button.
●
Using the PLUS or MINUS button correct the image.
●
Press the CONFIRM button.
Correcting skew distortion
●
Select symbol .
●
Press the CONFIRM button.
●
Using the PLUS or MINUS button correct the image.
●
Press the CONFIRM button.
Adjusting colors
●
Select abbreviation
CA
(Color Adjustment).
●
Press the CONFIRM button.
The second level of the OSD menu will be displayed.
2
GC
2
CA
➩➪
93 65
U1 U2
1 Hardware / Software Installation User’s Manual Line Computer UNIX
1.2 Hardware Installation Software Version 402.xx Edition 06/96
1 - 16
Setting color temperature
●
Select color temperature
93
(9300K) or
65
(6500K).
●
Press the CONFIRM button.
Setting user-defined colors
●
Select
U1
(User Mode 1) or
U2
(User Mode 2).
●
Press the CONFIRM button.
The third level of the OSD menu will be displayed.
●
Select
R
(red),
G
(green) or
B
(blue).
●
Press the CONFIRM button.
●
Using the PLUS or MINUS button set the color.
●
Press the CONFIRM button.
●
Repeat the procedure for the other colors.
Recalling color presettings
●
In submenu
CA
select symbol
➩➪
(Recall Color).
●
Press the CONFIRM button.
All color adjustments will be restored to the factory settings.
Degaussing the screen
●
Select
DG
on the first level of the OSD menu.
●
Press the CONFIRM button.
The message "DEGAUSSING NOW" will then appear on the screen.
3
U1
R
I I I I I
G
I I I I I
B
I I I I I
User’s Manual Line Computer UNIX 1 Hardware / Software Installation
Software Version 402.xx Edition 06/96 1.2 Hardware Installation
1 - 17
Setting synchronisation
By default, the monitor is set to separate horizontal and vertical synchronisation (Separate/Composite
sync.).
If the monitor is connected to a computer which is not compatible with the industry standard, the
synchronization type may have to be changed.
●
On the first level of the OSD menu select
IS
.
●
Press the CONFIRM button.
The second level of the OSD menu will be displayed.
●
Select
HV
(Seperate/Composite sync.) or
SO
(Sync. On Green).
●
Press the CONFIRM button.
Activating/deactivating Power Management
The monitor’s Power Management can be deactivated.
However, it should as a rule remain active so that you can utilize the monitor’s power-saving mode.
●
Select
IS
(Input Selection).
●
Press the CONFIRM button.
The second level of the OSD menu will be displayed.
●
Select
PS
(Power Saving) or
NO
(No Power Saving).
●
Press the CONFIRM button.
2
IS
HV / SO---------HV
PS / NO---------PS
2
IS
HV / SO---------HV
PS / NO---------PS