00190802-02.pdf - 第376页
User’s Manual Line Computer UNIX 13 Production Tools / Set-Up Software Version 402.xx Edition 06/96 13.1 Set-Up Edit or (Feeder Part and WPC Editors) 13 - 25 Fig. 13.1.19 Machine Opt. Data Edi tor The Mac hine Opt. Da ta…
13 Production Tools / Set-Up User’s Manual Line Computer UNIX
13.1 Set-Up Editor (Feeder Part and WPC Editors) Software Version 402.xx Edition 06/96
13 - 26
Identification Field
The identification field contains the following data which cannot be edited:
-
Station:
Name of the current station including Overall system/sub-
line/line/set-up/
station name
-
Mach.opt.:
Name of the Nozzle Changer
-
Location:
Name of the location where the machine option is set up
Command area
Commands are available in the command area by means of which nozzles can be allocated, moved and deleted.
For a commond to be executed, it must be clicked on. The icon turns gray then.
-
Create
If this icon is active, a nozzle can be allocated to a location in the Nozzle Changer.
●
Click on icon in the command area.
●
Click on the target location in the Divisions selection field.
●
Click on a nozzle in the Nozzle selection field.
The number of the nozzle is then entered in the target location.
-
Move
If this icon is active, a nozzle can be moved to another location within a Nozzle Changer.
●
Click on icon in the command area.
●
Click on the target location in the Divisions selection field.
●
Click on the nozzle you wish to move.
The moved nozzle is displayed in the target location (division).
-
Delete
If this icon is active, a nozzle can be deleted from a location in the Nozzle Changer.
●
Click on icon in the command area.
●
Click on the nozzle at the particular location.
The nozzle is deleted from the location without any verification query being displayed.
Selection Field "Divisions"
This selection field contains a listing of all Nozzle Changer locations in numerical sequence. Nozzles can be
allocated to empty locations as required. If nozzles were assigned to nozzle changer locations upon setting up
the station configuration, such allocations cannot be changed in the Feeder Part Editor.
User’s Manual Line Computer UNIX 13 Production Tools / Set-Up
Software Version 402.xx Edition 06/96 13.1 Set-Up Editor (Feeder Part and WPC Editors)
13 - 25
Fig. 13.1.19 Machine Opt. Data Editor
The Machine Opt. Data Editor is subdivided into the following areas:
-
Menu bar
-
Identification field
-
Command area
-
Selection field "Divisions"
-
Selection field "Nozzle"
Menu Bar
The menu bar contains the menus "FILE", "EDIT" and "HELP".
☞
NOTE
The functions and the operation of the menus "FILE" and "HELP" are similar to those in other application
programs of the line computer and are described in detail in chapter 2 "General Information on Using the
Program".
EDIT
Menu
The EDIT menu contains the following option:
-
Reset
This function cannot be executed as of yet.
menu bar identification field
selection field
"Nozzle"
command
selection field
"Divisions"
area
13 Production Tools / Set-Up User’s Manual Line Computer UNIX
13.1 Set-Up Editor (Feeder Part and WPC Editors) Software Version 402.xx Edition 06/96
13 - 24
Fig. 13.1.18 Diagonal in X- Direction and Y-Direction
☞
NOTE
If offset values were entered that are not valid for the selected feeder type, the respective editing fields are
surrounded by a red frame. The invalid values must first be corrected before all values can be accepted.
13.1.5.6 Nozzle Changer / Machine Options Editor
Clicking on the "Nozzle Changer" option on the SERVICES menu causes the window "Machine Opt. Data Editor"
to be opened (see Fig. 13.1.19). This option cannot be selected in the WPC Editor.
The Nozzle Changer can be configured with the required nozzles for a given set-up in the Machine Opt. Data
Editor. The nozzles are allocated to the individual locations (divisions) of the Nozzle Changer. Within a Nozzle
Changer nozzles can be moved or deleted. This allocation can be changed at any time as required.
The Machine Opt. Data Editor can also be invoked upon setting up the station configuration in order to
permanently assign particular nozzles to given locations (divisions). This allocation can only be changed there.
If nozzles were assigned to given locations in the nozzle changer in Station Configuration, they are displayed
upon opening the Machine Opt. Data Editor. These locations cannot be changed in the Feeder Part Editor.
center of last compartment
center of
first compart-
diagonal X [mm]
diagonal
Y [mm]
compartment
of waffle-
pack tray
waffle-pack
tray carrier
ment