00190802-02.pdf - 第425页
User’s Manual Line Computer UNIX 14 Control / Control Modules Software Version 402.xx Edition 06/96 14.2 Job Control 14 - 23 - (Insert) By ac tivating Inser t prior to the edi ting operat ion, a job which has been newly …
14 Control / Control Modules User’s Manual Line Computer UNIX
14.2 Job Control Software Version 402.xx Edition 06/96
14 - 22
14.2.3.7 Command Area, Section "Edit"
-
(Prior.insert)
When this icon is activated prior
to the editing operation, any newly created job in the editing area will
be inserted into the current list by selecting OK and immediately
submitted to a producibility check.
If the latter has a positive result, the job is considered priority-scheduled (corresponds to the "Prior.
schedule" command, see page 14 - 18).
●
Activate the icon and subsequently the icon.
The edit support "Job data" (FSB) opens.
●
In the FSB successively select the files required for job to be produced by double-clicking
(<PCB>.la, <line>.ak, <subline>.va and <setup>.ar). After the setup has been selected, the FSB
closes.
The names of the selected files are now displayed in the editing area in the corresponding editing
fields.
●
Click on the Lot name and enter a name for the lot (max. 21 characters).
●
Click on the Lot size editing field and enter a number for the nominal size of the job
(max. 10 numbers ranging from "1" through "2147483674").
●
Click on the Lot type editing field and enter the letter for the lot type desired.
This letter may be an "R" denoting blanks (i.e. fixed nominal sizes are input), an "F" denoting
finished parts (i.e. more PCBs are input than predefined under the lot size) or a "U" denoting an
infinite lot (i.e. the nominal size is of no importance). No other letters are valid.
●
If required, delete the default value "1" in the Priority editing field and enter a different value for
the priority of the job. (The priority values are required for Set-Up Optimization).
For defining the priority 2 characters within the range from "1" through "99" can be selected. The
higher the value the higher the priority.
●
Click on the OK button in the command area.
The job is transferred to the job list, immediately checked for producibility and subsequently pro-
cessed before all other scheduled jobs are processed.
In the case of faulty entries, the corresponding field is surrounded by a red frame and an error
message is displayed above the job list. The faulty entries must be corrected.
☞
NOTE
Depending on the setting of the "Insert" option (see page 14 - 17), the new job will be added at the
top or at the end of the current list, or inserted by a mouse-click (without "OK").
User’s Manual Line Computer UNIX 14 Control / Control Modules
Software Version 402.xx Edition 06/96 14.2 Job Control
14 - 23
-
(Insert)
By activating
Insert
prior
to the editing operation, a job which has been newly created in the editing
area can be inserted into the current list by choosing
OK
.
●
Activate the icon and subsequently the icon.
The "Job data" edit support (FSB) is opened.
●
Further procedures to be followed are the same as described under the "Prior. insert" command
(see page 14 - 22).
-
(Change)
If this icon is activated and a job is selected from the view area with the right
mouse button, its data
are transferred to the editing field and can now be edited.
☞
NOTE
For a job that has already been scheduled, only the data for the lot type and the nominal size can be
changed, all other data cannot be edited.
Example: Renaming a job
●
Activate the icon.
●
Click on the job to be renamed with the right mouse button.
All data are transferred to the editing area.
●
Click on the
Lot name
editing field.
●
Delete the old name and enter a new name.
●
Click on the
OK
button in the command area.
The job is displayed in the job list with the new name.
(Edit-support)
Clicking on this icon causes the "Job data" edit support (FSB) to be opened if beforehand
either the
icon for the "Prior. insert" command or the "Insert" command was activated.
●
Activate the icon.
The "Job data" edit support (FSB) first opens containing the file selection of all defined PCBs.
●
Successively select <PCB>.la, <line>.ak, <subline>.va and <setup>.ar by double-clicking in each
case.
The FSB closes and the names of the selected files are displayed in the appropriate editing fields.
-
OK
The editing session is terminated by choosing
OK
, and the job is inserted in the job list in accordance
with the setting of the "Insert" option (see page 14 - 17).
14 Control / Control Modules User’s Manual Line Computer UNIX
14.2 Job Control Software Version 402.xx Edition 06/96
14 - 24