00190802-02.pdf - 第439页
User’s Manual Line Computer UNIX 14 Control / Control Modules Software Version 402.xx Edition 06/96 14.4 Station Control lers 14 - 37 14.4.4.2 Command Area Here, a l isting o f the sche duled lots and a listin g of the s…
14 Control / Control Modules User’s Manual Line Computer UNIX
14.4 Station Controllers Software Version 402.xx Edition 06/96
14 - 36
14.4.4.1 Display Area
The individual sections of this area contain the following information:
-
Station number number of the station assigned to the station controller (e.g. 2)
(in the left section of the window)
-
Line: name of the Line (e.g. SMT.AK)
-
Station: logic name of the station, IEC bus address and type of station
e.g. Siplace_S <Siplace_19 placing station>
-
Operating Mode:
Barcode: type of barcode strategy (type and filter)
UFO strategy: type of UFO strategy (e.g. Verificat., Proceed)
-
Lot:
Name: lot name (e.g. clock radio)
PCB type: name of PCB type (e.g. radio.la)
No. of PCBs: scheduled and actual number (e.g. Sched.: 100, Act.: 96)
-
PCB:
Identification: identification number of the PCB
(no. is only displayed for barcode strat. "with barcode";
if "without barcode" is selected, field remains blank)
-
Station description:
Set-up: set-up name (e.g. radio1.ar)
Conveyor width: conveyor width setting in 1/10 mm
-
Station message: status of station (e.g. "Line computer not connected with
station yet")
User’s Manual Line Computer UNIX 14 Control / Control Modules
Software Version 402.xx Edition 06/96 14.4 Station Controllers
14 - 37
14.4.4.2 Command Area
Here, a listing of the scheduled lots and a listing of the scheduled PCBs with details on the current status of
the station can be called up, as required. The listings are shown in separate windows. The contents of the
windows are automatically and constantly updated as long as one of these windows is open.
-
Viewing Lot list
●
Click on Scheduled lots listed under "Display".
The window containing a listing of the scheduled lots is opened.
The job currently being processed is identified by an "a" in the first column.
-
Closing the window (lot list)
●
Click on Quit.
The window is closed.
-
Viewing PCB list
●
Click on Scheduled PCBs listed under "Display".
The window containing a listing of the currently processed (scheduled) PCBs is opened.
-
Closing the window (PCB list)
●
Click on Quit.
The window is closed.
14 Control / Control Modules User’s Manual Line Computer UNIX
14.4 Station Controllers Software Version 402.xx Edition 06/96
14 - 38
Another field within the command area of the controller's main display window is "Quit".
-
Closing
the Main Display Window
●
Click on
Quit
.
All currently open windows of the station controller's user interface are now closed
(see also "Quit" on the menu).