00190802-02.pdf - 第93页

User’s Manual Line Computer UNIX 3 Desktop (Root Window) Software Version 402.xx Edition 03/97 3.2 Desktop User Interface 3 - 11 ● Enter the number as sociated with the de sired o ption, e.g. 3 , if you wish to configure…

100%1 / 577
3 Desktop (Root Window) User’s Manual Line Computer UNIX
3.2 Desktop User Interface Software Version 402.xx Edition 03/97
3 - 10
●
Change the Broadcast address or accept the preset value by pressing RETURN.
●
Confirm the correctness of the address with
y
and by pressing RETURN.
●
Change the Domain name or accept the preset value by pressing RETURN.
●
Confirm the correctness of the name with
y
and by pressing RETURN.
The data are accepted and the UNIX window closes.
●
The computer system is to be shut down using the
Shutdown
main menu function and subse-
quently to be rebooted. The line computer system is started with the new network settings.
-
Log-on of external computers
With this menu option it is possible to log external computers of the customer’s network onto the com-
puter system. These so-called external computers may be other line computers or the customer’s host
computers.
●
Click on
OPTIONS
-->
Log on external computer
.
The UNIX window "Change hosts & automount configuration" opens.
●
Enter the root password at the cursor position and then press the RETURN key.
●
Respond to the query as to whether changes are to be made with
y
and confirm by pressing RETURN.
●
Enter the Host name (name of the external computer) and confirm by pressing RETURN.
●
Respond to the following query as to whether the name is correct with
y
and confirm by pressing
RETURN.
●
Enter the IP-address and confirm by pressing RETURN.
●
Confirm the correctness of the address with
y
and by pressing RETURN.
●
Respond to the query as to whether an NFS connection is to be established with
y
or
n
and con-
firm by pressing RETURN.
If
y
was entered,
●
enter the Mount path and confirm with
y
and by pressing RETURN.
●
Confirm the correctness of the Mount path with
y
and by pressing RETURN.
●
Respond to the query as to whether any additional changes are to be performed with
n
and con-
firm by pressing RETURN. The UNIX window closes.
-
Change network configuration
This menu option is used to directly start the ‘netconfig’ program for the configuration of the network.
The selection of this option therefore requires that special caution be exercised. Prior to starting the
program the operator should be knowledgeable about which options must be selected for a correct
configuration.
Primarily, the ’netconfig’ program for the configuration of the LAN connection (output of the LAN card)
is used.
●
Click on
OPTIONS
-->
Change network configuration
.
The "Change network configuration" UNIX window opens.
●
Enter the root password at the cursor position and then press the RETURN key.
The following network configuration possibilities can be selected from:
1. Add a chain
2. Remove a chain
3. Reconfigure an element in a chain
q. Quit
User’s Manual Line Computer UNIX 3 Desktop (Root Window)
Software Version 402.xx Edition 03/97 3.2 Desktop User Interface
3 - 11
●
Enter the number associated with the desired option, e.g.
3
, if you wish to configure the LAN
connection (LAN card output)l.
In the following, examples are provided of the procedures to be observed for the configuration of the
LAN connection.
To set the output of the LAN card to BNC output, the following entries (number of option, or "y" or "n")
are to be made. After each entry, the RETURN key must be pressed.
●
3
: (reconfigure)
●
4
: (sco_tcp ->e3E0)
●
2
: (e3E0)
●
y
: (reconfigure)
●
n
: (EISA bus)
●
n
: (automat. configur.)
●
15
: (IRQ)
●
300
: (I/O Base address)
●
y
: (combo adapter)
●
y
: (BNC socket)
●
q
: (select option)
●
y
: (relink)
●
The following two queries must both be answered with
y
and confirmed by pressing RETURN.
To switch to "Twisted Pair", the following must be entered (instead of "y") when the "BNC socket"
query appears:
●
n
: (BNC socket)
●
y
: (OnBoard TP transceiver)
To switch to "AUI", the following must be entered (instead of "y") when the "BNC socket" query
appears:
●
n
: (BNC socket)
●
n
: (OnBoard TP transceiver)
☞
NOTE
The ‘OnBoard TP transceiver’ query appears only if the ’BNC socket’ query has been answered with
‘
n
’.
●
Once the network configuration has been performed as per the instructions above, exit from the
UNIX window by selecting
q
(Quit).
●
Shut the computer system down using the
Shutdown
function on the main menu and subse-
quently reboot.
The line computer system is now started with the new network configuration.
3 Desktop (Root Window) User’s Manual Line Computer UNIX
3.2 Desktop User Interface Software Version 402.xx Edition 03/97
3 - 12
-
Install GF-Bibliothek
This menu option enables you to install a new GF library into the "Master data" directory from
diskette. When so doing, all standard package forms (range 1 ... 1500) already contained in the
"Master data/GF-Bibliothek" library will be replaced.
●
Click on
OPTIONS
-->
Install GF-Bibliothek
.
The following dialog box opens.
Settings to choose from prior to installing the new GF library
Line configuration
-
Only SIPLACE machines
The
Only SIPLACE machines
button is activated by default. This setting is to be maintained if the
active line comprises exclusively SIPLACE machines.
If the line consists of one or more HS-180 machines, the
Only SIPLACE machines
button needs to
be deactivated.
Options
-
Maintain handling data
If this button is activated, only
the vision data of the standard package forms will be overwritten.
If the button is deactivated (default setting), both the vision and
the handling data of the standard
package forms will be overwritten
-
Search for similar package forms
If this button is activated, all customer-specific package forms within the range from 1501 to 2047 will
automatically be compared for similarity with the new standard package forms, after the new GF
library has been installed.
If the button is deactivated, (default setting), no similarity comparison will be carried out.
Settings area