80S-20贴片机.pdf - 第270页
8 IC Head S IPLACE 80S-20/F4 Service Manual 8.2 Structure and Functional G roups of the IC Head Edition 01/97 8 - 8
SIPLACE 80S-20/F4 Service Manual 8 IC Head
Edition 01/97 8.2 Structure and Functional Groups of the IC Head
8 - 7
On the solenoid valve, there is a small, light-red push-button (item A, Fig. 8.2.1 page 8 - 4). This is used to
disable the clamping while the automatic placement machine is running.
WARNING ∆
!
∆
!
∆
!
Do not move the disabled z axis manually unless the clamping device has been deactivated. The compressed
air supply must first have reached working pressure.
To deactivate, press the red push-button on the solenoid valve. If you do not follow this warning, the sleeve
clamping device may be damaged.
,&+HDG%RDUG
The IC head board contains the vacuum analysis device, the push-lock terminals for the axes, the solenoid
valves of the IC head, etc. See also Fig. 8.2.2.
8 IC Head SIPLACE 80S-20/F4 Service Manual
8.2 Structure and Functional Groups of the IC Head Edition 01/97
8 - 8
SIPLACE 80S-20/F4 Service Manual 8 IC Head
Edition 01/97 8.3 Servicing Work on the Z Axis
8 - 9
6HUYLFLQJ:RUNRQWKH=$[LV
7RROV(TXLSPHQWDQG&RQVXPDEOHV
6SDUH3DUWV
5HSODFHWKH7RRWKHG%HOW
See item 7 in Fig. 8.3.1 page 8 - 12
● Loosen the synchronizing disc to slacken off the toothed belt.
● Replace the toothed belt.
● Adjust the tension of the toothed belt until the belt tension measuring device displays a frequency of
190Hz ± 5Hz.
● Check the zero point correction value and the axis servo setting.
)URPLWHPQXPEHU
Hexagon socket screw key, set
Open-ended spanner, size 13
Mount for sleeve removal 00318297-01
BRECO belt tension measuring device, complete 00326015-01
Feeler gauges 0.5 mm - 1.0 mm
SITEST program
Adjusting Instructions
Loctite 241 screw adhesive 02101037-01
)URPLWHPQXPEHU
Synchroflex 6T2/220 toothed belt 00304069-01
Motor for z axis 00306385-02
Spring steel sheet (nozzle support) 00304037-05
End position BERO 3RG4/6.5 mm/sn = 1.5 mm/1S 00306432-01
IC head sleeve, complete 00310555-01