80S-20贴片机.pdf - 第404页

12 Vision s ystems SIPLA CE 80S-20/F4/F5 Service Manual 12.6 Coplanarity Option Edition 09/99 12 - 52 12.6.18. 3 T ranslating th e T exts in the AD P File : (In the s ame or der di splayed in the ADP-Fi le) Germa n Engli…

100%1 / 483
SIPLACE 80S-20/F4/F5 Service Manual 12 Vision systems
Edition 09/99 12.6 Coplanarity Option
12 - 51
delta: 25, sec_min: 18, sec_max: 33
Vorzeichen: x_a: 1, y_a: 1, x_e: 1, y_e: -1
---------------------- Friday 05 June 18:01:23 ----------------------
R O H D A T E N: Gf_nr: 1928 R_nr: 3
0 -1 40891 39955 39661 39569 39557 39545 39531 39555 39541 39519
39555 39515 39527 39503 39523 39569 39505 -1 -1 -1 -1 -1
-1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 40545
40417 40271 40101 39981 39539 39449 39395 39383 39343 39307 39279 39299
39315 39323 39341 39381 39383 39419 39407 39433 39453 -1 -1 -1
-1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
-1 39313 39261 39287 39215 39109 39063 39047 39023 38983 39009 39039
39033 39035 39039 39049 39051 38983 38937 -1 -1 -1 -1 -1
-1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
................u.s.w.
bis 30. Beinchen der 2. Reihe (R_nr: 3):
................ -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
-1 -1 -1 -1 -1 -1 -1 38967 38899 39017 39009 38859
38811 38819 38861 38853 38829 38881 38875 38841 38827 38885 38927 38925
38987 38963 -1 0 0 0 0 0 0 0 0 0 0 at the end = Credits
B E I N H O E H E N Gf_nr: 1928 R_nr: 3
0 65 62 27 21 2 0 13 25 43 41 29
27 30 6 14 10 31 47 55 21 0 0 0
R E P O R T Gf_nr: 1928
0 00252 97 21 55 47 31 10 14 6 30 27
29 41 43 25 13 0 2 21 27 62 65 16
24 52 46 39 62 56 42 30 4 0 15 31
30 50 53 45 34 14 0 0 0 0 0 0
****** B A U T E I L E N D E Gf_nr: 1928 ******
---------------------- Friday 05 June 18:01:50 ----------------------
Bestueckreihenfolge, naechstes BE
Eintr: 1 Piptyp: 418 Pos-Idx: 4 BE-ebene: 0
---------------------- Friday 05 June 18:02:06 ----------------------
Ablauf-Daten-Protokoll wurde ausgeschaltet
NOTE
In the protocol of test command 8, only the final result is output to the file.
The report (= last line) in the protocol of test command 8 is, e.g.:
00 2856100000000
The first zero at the beginning of the line means that the setpoint for the deviation in height is met.
The second zero means that the setpoint for the angular deviation is met.
12 Vision systems SIPLACE 80S-20/F4/F5 Service Manual
12.6 Coplanarity Option Edition 09/99
12 - 52
12.6.18.3 Translating the Texts in the ADP File :
(In the same order displayed in the ADP-File)
German English:
Ablauf-Daten-Protokoll wurde eingeschaltet Run Data Protocol has been turned on
B A U T E I L S T A R T COMPONENT START
Copl: Ideale Anf-/Endpos bezogen auf BE 0Grad Copl.: Ideal start / end position at relative to
component 0 degrees
Copl: Reihen-Nr.: Copl.: Series No.
Copl: Gruppen-Nr. der GF-Beschr: 1 Copl.: Group No. of GF description: 1
Copl: Korrektur der Anf-/Endpos Copl.: Correction of start / end position
Vorzeichen: Sign
R O H D A T E N: RAW DATA
u.s.w. bis 20. Beinchen der 1. Reihe: etc., up to 20th lead in 1st row
B E I N H O E H E N LEAD HEIGHTS
Bestueckreihenfolge, naechstes BE Placement sequence, next lead
Eintr: 1 Piptyp: 418 Pos-Idx: 4 BE-Ebene: 0 Entry: 1 nozzle type: 418 Pos.IDX:
Component level: 0
Ablauf-Daten-Protokoll wurde ausgeschaltet Run Data Protocol has been turned off
SIPLACE 80S-20/F4/F5 Service Manual 12 Vision systems
Edition 09/99 12.6 Coplanarity Option
12 - 53
 &RSODQDULW\(UURU0HVVDJHVGXULQJ3ODFHPHQW6HFTXHQFHDQG
3RVVLEOH&DXVHV
12.6.19.1 Error Message: LEAD MISSING
1. Cause:
Poor component quality: Laser beam cannot
reach component lead
Analysis:
Chopping Operation Activate vision system:
Do lead ends form a straight line?
Raw data: Count leads
2. Cause:
Handling error: Lead bent laterally
Analysis:
Chopping Operation activate vision system:
Are leads bumping together?