80S-20贴片机.pdf - 第464页
Service Manual SIPLACE 80S-2 0/F4/F5 14 Pneumatic Cut ter Edition 04/98 14.1 Pneumatic Cutter and Empty-Tape Duct 14 - 6 14.1.5 Diagram of Pneuma tic System Fig. 14.1.2 Diagram of Pneumatic System
14 Pneumatic Cutter Service Manual SIPLACE 80S-20/F4/F5
14.1 Pneumatic Cutter and Empty-Tape Duct Edition 04/98
14 - 5
14.1.4 Overview: Pneumatic Cutter with Empty-Tape Duct
Fig. 14.1.1 Overview of Pneumatic Cutter and Empty-Tape Duct
Key:
1) "Pneumatic cutter"
2) 3) 4) Retaining bracket for cutter, left and right, including fastening bolts*)
5) Nuts and bolts to fasten the cutter on the retaining brackets,
2 socket hex bolts each, M 6x10
2 hex nuts each, M6
6) 7) Baffle including fastening bolts (is not dismantled).
8) Empty-tape duct (dismantle or exchange only as a single unit)
9) Fasteners for the empty-tape ducts:
2 socket hex bolts M 4 x 6
10) Pins (left and right) and spacers underneath
*) Undo these bolts only to install the replacement cutter (see WARNING in Section 14.1.1).
Service Manual SIPLACE 80S-20/F4/F5 14 Pneumatic Cutter
Edition 04/98 14.1 Pneumatic Cutter and Empty-Tape Duct
14 - 6
14.1.5 Diagram of Pneumatic System
Fig. 14.1.2 Diagram of Pneumatic System
