00197385-03_SR70x_FeatureDescription_DE_EN.pdf - 第17页

SIPLACE Statio n Softw are 70x / Feature D esc ription Ausgabe 05/2014 Edit ion 17 3.11 " Virtual PCB Stack" The ne w feature "Virtual PCB Stack " allows to produc e two PC Bs with th e sam e widt h b…

SIPLACE Station Software 70x / Feature Description Ausgabe 05/2014 Edition

3.8 New Dip Module LDU_X for X-Tables

The new type of dip module, the linear dipping unit (LDU_X) is supported on X-type feeder tables.

The dip process is supported by all placement heads (C&P20A, CPP, Twin) on the X-series

placement machines. By the station software the LDU_X module is handled like any other X-

feeder. On the GUI of the station software the LDU_X module is displayed in the Feeder,

components and nozzles view.

CAUTION

In setup operation (activated through the unlocked key-operated switch), the operator is

able to start a squeegee cycle. However, if the LDU_X is used in the current product,

and the machine was not stopped and the LDU_X is operated parallel in setup mode,

this might damage the placement head!

3.9 Accuracy Check Tool (ACT)

With the Accuracy Check Tool (ACT) the placed components on a PCB can be measured for all

placement heads of the X series. For this a special glass PCB with many high-precisionally

measured fiducials and ACT component equipment are used. Depending on the selected

placement head, glass or ceramic components will be placed on the measuring board.

Subsequently, the placed components are measured with the PCB camera. The results can be

saved in a pdf file.

ACT is called in the Service – Accuracy Check view.

This function requires the "SIPLACE Service" activity level.

A detailed description can be found in the ACT user guide, item no. 00196351-xx, and in the online

help to the station software.

3.10 Fast Head Exchange

In order to increase the availability of the placement machines, repairs should be carried out as fast

as possible or be completely avoided by performing regular maintenance outside of the machine.

The station software automatically detects if a head exchange has been performed, and if

maintenance is planned for placement heads, the placement machines and in particular the nozzle

configuration can be optimally prepared for an exchange. During fast head exchange the

calibration is replaced by a "short calibration" and the operator is guided through a wizard for

updating the nozzle configuration. The wizard can be found in the Service view and should be

called before the actual exchange takes place. This function requires the "Machine Service" activity

level.

CAUTION

Placement head and camera always have to be exchanged together, otherwise a

complete calibration is required!

SIPLACE Station Software 70x / Feature Description Ausgabe 05/2014 Edition

3.11 "Virtual PCB Stack"

The new feature "Virtual PCB Stack" allows to produce two PCBs with the same width but different

placements in one job.

In SIPLACE Pro two PCBs have to be defined on one conveyor lane. During an additional

measurement each PCB is provided with a so-called “PCB Detection Inkspot”.

By means of this inkspot the PCBs differ from each other and by means of this marking the station

loads the accurate placement program.

3.12 Extension of the Form Editor (SIPLACE Vision)

The Form editor view of SIPLACE Vision has been extended as follows:

– Colinearity check

– Lead length and width inspection for CHIP components

– Face Down Recognition for further component types

– New lead type "rectangle"

– Separate group description may be activated at the station

A detailed description of the SIPLACE Vision functions can be found in the online help of the

station software.

3.13 Auto Configuration

The "Auto Configuration" feature has been implemented in the station software in order to support

multiple configurations for different types of machines, heads, conveyors etc. The station software

detects the type of hardware constituting the machine and configures itself accordingly. On the GUI

the operator is prompted to confirm the auto configuration and, if necessary, a download of the

appropriate eSW.

3.14 Reduced Air Consumption with Vacuum Pump

X-series machines with C&P20A placement heads can optionally be operated with a vacuum pump

in order to reduce the air consumption. For this, the machine has to be equipped with a retrofit kit.

Detailed information can be found in the "X-Series Retrofit instructions", Item no. 00195089-xx.

3.15 Screen Saver

A screen saver has been integrated in the station software in order to protect the screen against

sticking effects. "Sticking effects" signify an always visible pattern displayed on the screen, caused

by statical images or capacity overload. If no entries are made during a defined space of time, the

screen saver starts and a vertical line is moving from the left to the right. As soon as an entry is

made (mouse movement or keyboard input) the screen saver stops and you can go on working

where you stopped before.

SIPLACE Station Software 70x / Feature Description Ausgabe 05/2014 Edition

3.16 Feeder Setting Comparison

With this feature the feeder settings in SIPLACE Pro are compared with the feeder settings made

in the setup. In case of differing values a warning is displayed, the feeder is deactivated and via the

GUI the operator is prompted to confirm the changed values or continue with the values from

SIPLACE Pro. This is to avoid that feeder settings (such as pickup position, feeder pitch) are

changed unintentionally. However, no confirmation is required if the feeder settings are changed

directly on the GUI.

The comparison is performed in the following cases:

– Immediately after a job download.

– When feeder settings are modified directly on the feeders after a job download.

– When one or several feeders are exchanged during production.