00197385-03_SR70x_FeatureDescription_DE_EN.pdf - 第73页

SIPLACE Statio n Softw are 70x / Feature D esc ription Ausgabe 05/2014 Edit ion 73 Example In the f ollowing R andom Setup sc enario t he com ponents on Tr ack 1, 2 an d 3 m ay have d ynam ic a lternativ es on t he Trac …

SIPLACE Station Software 70x / Feature Description Ausgabe 05/2014 Edition

If the board is canceled the operator can decide from where the board shall be removed (output

section or last station in the line):

Figure 7-13: Unknown placement state – Remove board

7.19 Defragmenting Original Setup When Using SIPLACE Random

Setup

When using the SIPLACE Random Setup function, the original setup gradually gets fragmented

and is spread on the tracks, i.e. more and more feeders are no longer available on the tracks on

which they should be according to the downloaded setup.

As of this station software version, assistance is available on the GUI to bring back the feeders

onto the correct tracks.

Whenever the operator exits the Random Setup mode via the Clear Random Setup button in the

dual table view under Setup – Locations, feeders which are not located on the original tracks are

highlighted in orange color. If a highlighted feeder is selected in the Current grahic via the orange

arrow buttons, the corresponding feeder gets selected in the Expected graphic as well.

Now the operator has to remove the first highlighted feeder. In the Expected graphic the feeder is

then marked as missing (red color). The red feeder shows the correct track for the removed feeder

onto which the operator shall put the feeder back. After that, the red highlighting disappears and

the operator can continue with the next feeder highlighted in orange color.

SIPLACE Station Software 70x / Feature Description Ausgabe 05/2014 Edition

Example

In the following Random Setup scenario the components on Track 1, 2 and 3 may have dynamic

alternatives on the Tracks 1, 22 and 23 respectively. The feeder on Track 21 (32mm) is not

required for the current product. When the feeder has been removed from Track 2, the feeder on

Track 22 shall be put back onto Track 2.

Figure 7-14: Feeder was removed from Track 2

Figure 7-15: Feeder on Track 22 shall be put back onto Track 2

SIPLACE Station Software 70x / Feature Description Ausgabe 05/2014 Edition

7.20 Changed User Guidance at Pickup Errors

As of this station software version the user guidance at pickup errors and the corresponding

deactivation of the feeders has been changed.

At pickup errors (i.e. for every deactivation reason) the colored marks now lead up to the setup

views and no longer to the Deactivated tracks view. For this, the Activate button has been added

to some views in order for the operator to handle the error in these views. The changes apply to the

following views:

Figure 7-16: Setup view for X-table

– The Locking menu with the selection Lock/Unlock.

– The Activate button is new and is activated if the operator can activate the selected track (in

the Current graphic).