00197385-03_SR70x_FeatureDescription_DE_EN.pdf - 第21页
SIPLACE Statio n Softw are 70x / Feature D esc ription Ausgabe 05/2014 Edit ion 21 4.10 Supported hardwar e options w ith an interfa ce to the 703 stati on sof tw ar e Feature X2 X3 X4 X4i X4i (HCU/ GCU SX1/ SX2 Addition…
SIPLACE Station Software 70x / Feature Description Ausgabe 05/2014 Edition
20
4.7 Long Board Option
The Long board option is supported on the X2, X3 and X4 placement machines. Boards up to a
length of 610 mm can be placed with this option.
4.8 Automatic Change to Manual Mode during Calibration
During mapping preparation and started but not yet completed calibration, the manual mode is
automatically activated. I.e., although the Start production automatically option is set, the
production is not automatically started by pressing the machine start key. This is to avoid, that e.g.
the mapping plate is unloaded accidentally after the cover was opened and the voltage has been
re-established.
4.9 Extension of SIPLACE Vision
NOTICE
Detailed information on the SIPLACE Vision functions can be found in the online help of
the station software.
SIPLACE Vision has been extended as follows:
– Two new features are available on the Vision Teach Station:
Testsuite
With this feature the operator can test current settings simultaneously on several measurement
contexts.
Component Shape Finder
With this feature the operator can search for existing component shapes for a given
measurement.
– Internal inspection of the appearance of more leads than described for SO/SOT components.
– Alternatively, synthetic ink spots can be placed inverted in the Ink spot editor, i.e. also if no ink
spot was found.
– The "Brightness check inside the circle" can be activated in the Fiducial editor in order to
differentiate between circle fiducials and plated-through holes on the board.
– BGAs and Flip-Chip components with an irregular ball arrangement can be rapidly teached in a
few steps in the Form editor. The ball positions can be directly imported from a data sheet of
the manufacturer on the Vision Teach Station.
SIPLACE Station Software 70x / Feature Description Ausgabe 05/2014 Edition
21
4.10 Supported hardware options with an interface to the 703 station
software
Feature X2
X3
X4
X4i X4i (HCU/
GCU
SX1/
SX2
Additional information
Nozzle changer CPP
Nozzle changer
C&P20A
Nozzle changer
TwinHead
Placement head HFH
Gripper for TwinHead
Component cameras:
Type 28, 29, 38
Stationary, type 25
Stationary, type 33
Stationary, type 36
PCB cameras:
Type 24
Type 34
Single conveyor, right
side fixed (default)
Single conveyor, left
side fixed (variant)
Flexible dual conveyor,
right side fixed (default)
Flexible dual conveyor,
left side fixed (variant)
Mechanical stopper on
single conveyor
The stopper to use can be set. In the
Manual Operations view the set
stopper can be unloaded for
adjustment.
Mechanical stopper on
dual conveyor
The stopper to use can be set. In the
Manual Operations view the set
stopper can be unloaded for
adjustment.
Long board option
Thick boards
See section 4.13.4
Heavy boards
See section 4.13.5
PCB detection during
width adjustment
Hint on the GUI
PCB barcode for 1D
codes
PCB barcode for 2D
codes
SIPLACE Station Software 70x / Feature Description Ausgabe 05/2014 Edition
22
SIPLACE Interface
(variant)
The option is displayed in the
configuration GUI. Together with Quad
Lane only SMEMA interface is
possible.
Manual tray
WPC5
See section 4.15
Splice detection X-
feeder
Changeover table for X-
feeder
Component level
indicator
"IPTE Multi Stick
Feeder"
8x88 mm X-feeder
8-16
mm
8-16 mm
2x8 mm X-feeder
Reject conveyor with X-
adapter
Label feeder with X-
adapter
Stick feeder with X-
adapter
Dip module for X-tables
(LDU_X)
Vakuum pump option
for C&P20A plcement heads
Mapping plate
See section 4.20
ACT