c921199.R00_EN.pdf - 第58页
2-12 2 Replacing parts 3 Install the torque limiter pin. Insert the torque limiter pin for vertical movement and secure it by tightening the setscrew with a hexagonal wrench (1.5). • Tightening torque: 40N·cm 4 Install t…
2-11
2
Replacing parts
6.2 Installation
1
Install the axis of the unclamping
wire.
Pass the axis of the unclamping wire into the
new clamping lever assembly, install the
E-ring and secure the E-ring with longnose
pliers.
63217-9L-00
2
Install the clamping lever assembly.
Install the clamping lever assembly to the
body while compressing the spring.
63218-9L-00
Installing the axis of the unclamping wire
Step 1
E-ring
Axis of the unclamping wire
Clamping lever assembly
Installing the clamping lever assembly
Step 2
Spring
Clamping lever assembly
2-12
2
Replacing parts
3
Install the torque limiter pin.
Insert the torque limiter pin for vertical
movement and secure it by tightening the
setscrew with a hexagonal wrench (1.5).
• Tightening torque: 40N·cm
4
Install the clamping pin.
Insert the clamping pin from the body and
secure the screw with the Phillips screwdriver
(No. 2).
• Tightening torque: 55N·cm
63219-9L-00
63220-9L-00
c
CAUTION
Both the upper and lower body contact surfaces of the
clamping pin are machined. Fit the surfaces so that the
clamping pin is closely fitted onto the body.
63221-9L-00
Installing the clamping pin and torque limiter pin
Step 3, 4
Screw Clamping lever assembly
Torque limiter pin
Installing the clamping pin and torque limiter pin
Step 3, 4
Setscrew
Clamping pin
Torque limiter pin
Clamping pin body contact surface
Clamping pin
OK NG
2-13
2
Replacing parts
7. Tail pin
7.1 Removal
1
Remove the tail pin.
Remove the two bolts securing the tail pin
with a hexagonal wrench (2.5) and pull off
the tail pin from the body.
63222-9L-00
7.2 Installation
1
Install the tail pin.
Insert the new tail pin into the body aligning
the installation hole, and secure the tail pin
by tightening the two bolts using the
hexagonal wrench (2.5) while pressing the
tail pin all the way.
• Tightening torque: 55N·cm
63223-9L-00
Removing the tail pin
Step 1
Bolt
Tail pin
Installing the tail pin
Step 1
Bolt
Tail pin