c921199.R00_EN.pdf - 第59页

2-13 2 Replacing parts 7. T ail pin 7.1 Removal 1 Remo ve the tail pin. Remove the two bolts securing the tail pin with a hexagonal wrench (2.5) and pull off the tail pin from the body. 63222-9L-00 7.2 Installation 1 Ins…

100%1 / 86
2-12
2
Replacing parts
3
Install the torque limiter pin.
Insert the torque limiter pin for vertical
movement and secure it by tightening the
setscrew with a hexagonal wrench (1.5).
• Tightening torque: 40N·cm
4
Install the clamping pin.
Insert the clamping pin from the body and
secure the screw with the Phillips screwdriver
(No. 2).
• Tightening torque: 55N·cm
63219-9L-00
63220-9L-00
c
CAUTION
Both the upper and lower body contact surfaces of the
clamping pin are machined. Fit the surfaces so that the
clamping pin is closely fitted onto the body.
63221-9L-00
Installing the clamping pin and torque limiter pin
Step 3, 4
Screw Clamping lever assembly
Torque limiter pin
Installing the clamping pin and torque limiter pin
Step 3, 4
Setscrew
Clamping pin
Torque limiter pin
Clamping pin body contact surface
Clamping pin
OK NG
2-13
2
Replacing parts
7. Tail pin
7.1 Removal
1
Remove the tail pin.
Remove the two bolts securing the tail pin
with a hexagonal wrench (2.5) and pull off
the tail pin from the body.
63222-9L-00
7.2 Installation
1
Install the tail pin.
Insert the new tail pin into the body aligning
the installation hole, and secure the tail pin
by tightening the two bolts using the
hexagonal wrench (2.5) while pressing the
tail pin all the way.
• Tightening torque: 55N·cm
63223-9L-00
Removing the tail pin
Step 1
Bolt
Tail pin
Installing the tail pin
Step 1
Bolt
Tail pin
2-14
2
Replacing parts
8. Under plate
8.1 Removal
1
Remove the clamping pin.
Remove the screw securing the clamping
lever assembly main axis with a Phillips
screwdriver (No. 2) and remove the
clamping pin by inserting a hexagonal
wrench or the like in the thread part.
2
Remove the torque limiter pin.
Loosen the setscrew securing the torque
limiter pin for vertical movement of the
clamping lever assembly with a hexagonal
wrench (1.5) and pull off the torque limiter
pin.
63240-9L-00
63241-9L-00
3
Remove the clamping lever
assembly.
Remove the clamping lever assembly by
pulling off the axis of the unclamping wire.
4
Remove the tail pin.
Remove the two bolts securing the tail pin
with a hexagonal wrench (2.5) and pull off
the tail pin from the body.
63224-9L-00
Removing the clamping pin and torque limiter pin
Step 1–3
Setscrew Clamping lever assembly
Torque limiter pin Screw
Removing the clamping pin and torque limiter pin
Step 1–3
Clamping pin
Clamping lever assembly
Torque limiter pin
Removing the tail pin
Step 4
Bolt
Tail pin