444CEOM1-CM202.pdf - 第115页
Page 3-17 FUNCTIONS 3 3-4 Machine Adjustment This is used when you check the motion and make an adjustment of each part of the machine. ∗ On the main menu (default state) in the operator mode, you cannot select this func…
Page 3-16
444C-E-OMA03-A01-03
Production Information
3-3-4 Reset
This is used to reset production information.
Choose the information you would like to reset.
It is possible to choose more than a piece of
information at a time. When you press the
switch again, it is canceled.
Press Run .
Press Yes when the message appears.
1
2
Page 3-17
FUNCTIONS
3
3-4 Machine Adjustment
This is used when you check the motion and make an adjustment of each part of the machine.
∗ On the main menu (default state) in the operator mode, you cannot select this function.
1. Press
Machine
adjust
on the main menu.
•“Machine adjustment menu” is displayed.
∗ Pressing a switch displays each setting screen.
NOTICE
When returning to the main menu by pressing , a message may be displayed.
· When deciding whether to put back the tape feeding rod if it has come out
· When retracting the Z-axis to the origin position, if it has been lowered, so as to
prevent nozzle interference
3-4-1 Returning to Origin
This is used to return all the axes to their origins.
∗ Make sure no board is on the conveyor beforehand.
∗ After you have pressed Return to origin on the machine adjustment menu, make sure the servo
switches are ON, and then press
UNLOCK
→
START
. All the axes return to their origins.
444C-E-OMA03-A01-03
Appears only if the optional nozzle changer is
installed.
( 3-4-4 Nozzle Changing (Option))
Nozzle exch
Page 3-18
3-4-2 Conveyor Width Adjustment
This is used to adjust the widths of all the conveyors to the set size of board automatically.
∗ Make sure no board is on the conveyor beforehand.
∗ After you have pressed Cnvr adjustment on the machine adjustment menu, make sure the servo
switches are ON, and then press
UNLOCK
→
START
. The conveyor width adjustment screen is dis-
played.
Choose a stage.
Press this switch to adjust the width to the
board width of production data.
When you would like to set the optional board
width, enter it with numeric keys.
Press
UNLOCK
+ Run .
The rails are adjusted automatically.
3-4-3 Board Transport
This is used to perform transporting board in, transferring it from the stage A to B and transporting
it out to the next process for each step.
∗ After you have pressed PCB transfer on the machine adjustment menu, make sure the servo
switches are ON, and then press
UNLOCK
→
START
. The board transport screen is displayed.
∗ The operating method is the same as that of the board transport of production settings.
( 3-2-4 Board Transport)
Machine Adjustment
1
2
3
444C-E-OMA03-A01-02
M35E
TURN OFF THE SERVO SWITCH BEFORE PLACING A BOARD ON OR
REMOVING IT FROM THE CONVEYOR.
You will have serious injury if the machine is actuated.
WARNING