444CEOM1-CM202.pdf - 第119页
Page 3-21 FUNCTIONS 3 Machine Adjustment 3-4-7 Output Check This is used to check the states of the valves which are used frequently in adjustment for each stage and work each of them alone. Solenoid display Nozzle Y ou …
Page 3-20
Machine Adjustment
3-4-6 Input Check
All the input addresses the machine uses are sampled every other second, and its state is dis-
played in bit.
List display
Display for each address
• Select the stage to be displayed.
• The states of the input addresses the machine
uses are displayed with names for each bit.
Highlighted name shows its bit is ON (1).
(When you press the “Name” button, the state
of that bit is checked and displayed again.
Call by No
Displays the address that includes the speci-
fied No. at the left side of screen.
444C-E-OMA03-A01-02
Address List
Page 3-21
FUNCTIONS
3
Machine Adjustment
3-4-7 Output Check
This is used to check the states of the valves which are used frequently in adjustment for each
stage and work each of them alone.
Solenoid display
Nozzle
You can work each valve of compulsory blow,
vacuum and letting the nozzle out.
Conveyor
You can work the board positioning of the
board holder, side clamp and upper/lower
clamp.
Display for each address
• The states of the output addresses the ma-
chine uses are displayed with names for each
bit.
Highlighted name shows its bit is ON (1).
When you press the “Name” button with
UNLOCK
pressed, the signal opposite to the current
state is output and displayed again.
Call by No
Displays the address that includes the speci-
fied No. at the left side of screen.
444C-E-OMA03-A01-06
Address Solenoid
∗ For CM201-D/DU/DH or CM202-D/DU/DH/
DHU, this is an option.
Indicates the current values of the vacuum
sensor.
Page 3-22
Machine Adjustment
3-4-8 Axis Information
This is used to check the current positions of all the axes the machine controls and the status
information.
Current pos cnt
Displays the current position of each axis in
mm or pulse of status address.
pls : Displays the current position in pulse.
mm : Displays the current position in mm.
Status
Displays the state of status address, error/busy
of each axis, in bit.
pulse in a turn
This data is sampled and displayed against X-
and Y-axes only.
<Meaning of abbreviation>
X : X-axis of X-Y unit
Y : Y-axis of X-Y unit
Z : Z-axis
θ
:
θ
-axis
3-4-9 Recognition Device Maintenance
This is used to check all the recognition processing motions.
∗ For information about how to operate it, refer to “Appendix A RECOGNITION DEVICE” ( A-5
Recognition Device Maintenance).
3-4-10 Ring Load Information
This is used to display the load onto ring.
444C-E-OMA03-A01-03