444CEOM1-CM202.pdf - 第126页
Page 3-28 Machine Settings 3-5-6 Setting Backlight If the screen is left untouched until the set time has passed, the backlight turns off automatically . • Set the off-time by pressing the desired button indicating the o…
Page 3-27
FUNCTIONS
3
Machine Settings
444C-E-OMA03-A01-04
3-5-5 Customizing Operator Mode
The operator mode can be customized so that you can use the functions of data modification, file
operation, machine parameters, machine adjustment and machine settings in this mode.
∗ Even when you have set the machine settings so that it will be available in the operator mode,
you cannot customize the operator mode in the operator mode. When customizing the operator
mode, be sure to choose the machine settings from the engineer mode.
• Press the switch of the function you would like
to use in the operator mode.
Every time you press it, the display changes
alternately “Use” ←→ “Unused”.
Default
Returns all the displays to “Unused”.
<Main menu in the operator mode>
• The icons of the functions you have set “Use”
are displayed on the main menu in the operator
mode, then you can use those functions.
<Individual Function Selection Screen>
Select the desired function in operator mode.
Condition mount
During automatic operation, the conditional
mounting selection screen is displayed.
Table mode select
The screen of the exchange mode and
spare mode is displayed.
Individual
function
select
Page 3-28
Machine Settings
3-5-6 Setting Backlight
If the screen is left untouched until the set time has passed, the backlight turns off automatically.
• Set the off-time by pressing the desired button
indicating the off-time on the backlight setting
screen.
If wishing to disable the backlight-off function,
press Unuse .
∗ It is when the backlight setting screen is
changed to another screen that the backlight-
off time is actually set.
Only pressing the off-time button will not work
this function.
∗ To turn on the backlight again, press
LIGHT ON
on
the operating panel.
3-5-7 Nozzle Position
The center of the nozzle is measured and the nozzle position is changed when checking its diam-
eter before such as automatic operation.
It is reflected when picking up chips.
• If the value is out of range (±0.2 mm or over),
OV field is displayed in red.
444C-E-OMA03-A01-04
Page 3-29
FUNCTIONS
3
444C-E-OMA03-A01-01
3-6 Others
3-6-1 Explanations of Vacuum Sensor Functions
For CM201-D/DU/DH/DHU and CM202-D/DU/DH/DHU, the vacuum sensor is an option.
(For CM201-DS and CM202-DK/DS, it is a standard unit.)
If it is not installed, the following functions are not available.
1. Functions of the vacuum sensor
Detects the chip adhesion to nozzle that was caused by valve failures (also in mounting the
chip).
Detects the chip adhesion to nozzle in ejecting the chip.
Detects the clogging of nozzle or filter upon operation.
Detects the instability of the chip pick-up posture prior to mounting (including chip drop).
2. Details of detections
The other operational changes
1. After mounting on one board is completed, the chip eject error is checked with the chip above
the ejection tray.
2. Also in the chip recognition error, the chip eject error is checked.
∗ After an error, perform the corresponding operating procedure.
444C-618TE
1
2
3
4
detcetedeboT gninoitcnufrofsnoitidnoC gnimiT esuaC noitcas’enihcaM
rorretnuompihC
enihcaM
retemarap
”NOrosneS“
.dekcehcsillA
)sgnittesoN(
noitarepogniruD
detnuomsipihcretfA
elzzonotnoisehdapihC
evobapihcehthtiwpotsetaidemminA
yartnoitcejeeht
∗∗
∗
∗∗ yrevocertnuom-pihcehtnehW.1
lliwti”,esunU“ottessinoitcnuf
.tuodeirracebton
∗∗
∗
∗∗ noitcudorppotsnonehtnehW.2
enihcameht,desusinoitcnuf
.potstonlliw
rorretcejepihC
noitarepogniruD
pihcgnitcejenI
elzzonotnoisehdapihC
evobapihcehthtiwpotsetaidemminA
yartnoitcejeeht
↓
neercsunemehtotsnruterneercsehT
rorregniggolcelzzoNnoitareponopU
retliffogniggolC
elzzonfogniggolC
neercsehtnodeussisimralanA
↓
neercsunemehtotsnruterneercsehT
rorreytilibatsnipu-kciP
ehtrofylnO
hcihwotspihc
”NOnoitceteD“
ehtnitessi
atadpihc
noitarepogniruD
sipihcerofeB
detnuom
pu-kcipfoytilibatsnI
erutsop
tnenopmocmorfkaelriA
pordpihC
detnuomtonsipihcehT
↓
evobapihcehthtiwpotsetaidemminA
yartnoitcejeeht
∗∗
∗
∗∗ noitcudorppotsnonehtnehW
lliwenihcameht,desusinoitcnuf
.potston