444CEOM1-CM202.pdf - 第128页
Page 3-30 444C-E-OMA03-A01-02 3-6-2 V acuum Sensor Function Settings For CM201-D/DU/DH/DHU and CM202-D/DU/DH/DHU, the vacuum sensor is an option. (For CM201-DS and CM202-DK/DS, it is a standard unit.) If it is not instal…
Page 3-29
FUNCTIONS
3
444C-E-OMA03-A01-01
3-6 Others
3-6-1 Explanations of Vacuum Sensor Functions
For CM201-D/DU/DH/DHU and CM202-D/DU/DH/DHU, the vacuum sensor is an option.
(For CM201-DS and CM202-DK/DS, it is a standard unit.)
If it is not installed, the following functions are not available.
1. Functions of the vacuum sensor
Detects the chip adhesion to nozzle that was caused by valve failures (also in mounting the
chip).
Detects the chip adhesion to nozzle in ejecting the chip.
Detects the clogging of nozzle or filter upon operation.
Detects the instability of the chip pick-up posture prior to mounting (including chip drop).
2. Details of detections
The other operational changes
1. After mounting on one board is completed, the chip eject error is checked with the chip above
the ejection tray.
2. Also in the chip recognition error, the chip eject error is checked.
∗ After an error, perform the corresponding operating procedure.
444C-618TE
1
2
3
4
detcetedeboT gninoitcnufrofsnoitidnoC gnimiT esuaC noitcas’enihcaM
rorretnuompihC
enihcaM
retemarap
”NOrosneS“
.dekcehcsillA
)sgnittesoN(
noitarepogniruD
detnuomsipihcretfA
elzzonotnoisehdapihC
evobapihcehthtiwpotsetaidemminA
yartnoitcejeeht
∗∗
∗
∗∗ yrevocertnuom-pihcehtnehW.1
lliwti”,esunU“ottessinoitcnuf
.tuodeirracebton
∗∗
∗
∗∗ noitcudorppotsnonehtnehW.2
enihcameht,desusinoitcnuf
.potstonlliw
rorretcejepihC
noitarepogniruD
pihcgnitcejenI
elzzonotnoisehdapihC
evobapihcehthtiwpotsetaidemminA
yartnoitcejeeht
↓
neercsunemehtotsnruterneercsehT
rorregniggolcelzzoNnoitareponopU
retliffogniggolC
elzzonfogniggolC
neercsehtnodeussisimralanA
↓
neercsunemehtotsnruterneercsehT
rorreytilibatsnipu-kciP
ehtrofylnO
hcihwotspihc
”NOnoitceteD“
ehtnitessi
atadpihc
noitarepogniruD
sipihcerofeB
detnuom
pu-kcipfoytilibatsnI
erutsop
tnenopmocmorfkaelriA
pordpihC
detnuomtonsipihcehT
↓
evobapihcehthtiwpotsetaidemminA
yartnoitcejeeht
∗∗
∗
∗∗ noitcudorppotsnonehtnehW
lliwenihcameht,desusinoitcnuf
.potston
Page 3-30
444C-E-OMA03-A01-02
3-6-2 Vacuum Sensor Function Settings
For CM201-D/DU/DH/DHU and CM202-D/DU/DH/DHU, the vacuum sensor is an option.
(For CM201-DS and CM202-DK/DS, it is a standard unit.)
If it is not installed, the following functions are not available.
Setting “Vacuum Sensor check” in the option configuration to ON enables the
detections of a chip mount error, eject error, pick-up instability error, and nozzle
clogging error.
1. Press
Machine
parameter
in the main menu.
• The machine parameters menu is displayed.
2. Press Option config .
3. Press Other .
“Vacuum Sensor check” → 1
“Takeup & mount error detail display” → 1
(When this switch is set to ON, the details are
displayed.)
Others
4H4C-EEn-MpOcm-002
Page 3-31
FUNCTIONS
3
444C-E-OMA03-A01-01
Others
• This switch exists in the detailed chip data.
Enabling the vacuum sensor check enables the
pick-up instability detection.
• When the software switch “Pickup miss detect”
is set to ON, the error detection is carried out in
accordance with the settings in the chip data.
When it is set to OFF, the pick-up instability
detection is not carried out irrespective of the
settings in the chip data.
Machine’s screens