00194474-0702_AI_HeadReconfig_X_605_DE+EN.pdf - 第146页
2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits Head Reconfiguration Kits 07/2010 Edition 146 2.2 Part s, tools, and consumables required 2 2 Placement head fixing screws 6/12 segm. C&P head DIN9…
Head Reconfiguration Kits 2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits
07/2010 Edition
145
2.1.6 Requirements and restrictions for the CP 6/12 placement head
– The placement head CP 6/12 can be used both in connection with S feeder modules and X
feeder modules and the respective CO trolley or docking units or the MTC2.
– In a 2-gantry placement area, the CP6/12 heads can be operated both with a CP12/6 head and
with a TwinHead. Operation with a CP20 in a 2 gantry placement area is not permitted.
– Only use the nozzle changer and camera types which is suitable for this head type and elec-
trical modules as described in the instructions. Remove all modules which do not belong to this
head type. There may by the risk of a crash otherwise.
2.1.7 Conversion times
One should reckon with the following conversion times per head: 2
2
Placement head
Single / dual con-
veyor
Activity
Dismantling the C&P 6/12 30 min. Without options like the nozzle changer
and sensor for the component reject bin
Dismantling the TwinHead
40 min. With stationary standard camera and nozzle
changer. Without any options like additional vi-
sion systems
Dismantling the C&P 20
30 min. Without options like the nozzle changer
and sensor for the component reject bin
Assembly of the C&P 6/12
90 +/100 min. With mapping and without options like the nozzle
changer and sensor for the component reject bin
Assembly of the TwinHead
110 +/140 min. With mapping and with stationary standard cam-
era and nozzle changer. Without options such
as additional vision systems and sensor
component reject bin
Assembly of the C&P 20
90 +/100 min. With mapping and without options like the nozzle
changer and sensor for the component reject bin
2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits Head Reconfiguration Kits
07/2010 Edition
146
2.2 Parts, tools, and consumables required
2
2
Placement head fixing screws
6/12 segm. C&P head DIN912 M4x18 - 8.8 Item no. 00095023-
TwinHead DIN912 M4x14 - 8.8 Item no. 00095021-
20 segm. C&P head DIN912 M4x14 - 8.8 Item no. 00095021-
Torque wrench
Torque joint for placement heads Item no. 03042635-
Blade 170 x SK3 complete Item no. 03043440-
Torque screwdriver with setting scale Item no. 00376504-
Thread locker, gray Item no. 00318199-
Pressure testing device with measuring cable Item no. 00313523-
Conversion kit for a component trolley docking unit X Item no. 00378465-
MTC drawer frame(for TH / TH 2Port PA with MTC) Item no. 03009963-03
Nozzle changer TwinHead before the MTC X-series
(for TH / TH 2Port PA with MTC) Item no. 00119747-
Mapping test board HF/X/D3 508x450 Item no. 00373952-
Calibration jig, version 3 Item no. 03010565-
Nozzle / TH zero point correction Item no. 03008862-03
Calibration jig, version SST23 Item no. 03034148-
Assembly instructions: nozzle changer, X-series Item no. 00194482-
Assembly instructions: reject bin sensor Item no. 00194550-
Assembly instructions: flip-chip camera, digital 16x16 (SST 25) Item no. 00194554-
Assembly instructions: SIPLACE X-series head reconfiguration kits Item no. 00194474-
Assembly instructions: MTC2 on component trolley docking unit, X-S Item no. 00194725-
Installation instructions: MTC2 on SIPLACE HF Item no. 00193897-
Head Reconfiguration Kits 2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits
07/2010 Edition
147
2.3 Parts lists
00119721- TwinHead reconfiguration kits, X-series
03033629- Twin Pick+Place head/THK
03000902- P&P head adapter
00353446- SDS60/1.0Z1-01 servo amplifier
00353447- SDS60/0.5D1 servo amplifier
03004332- Set of ribbon cable, TWIN
03003049- Reject bin, IC head
03045087- DIN912-M6 x 12-A2-70
00315188- DIN 125-A 6.4-140HV-A2
00201463- DIN912-M3 x 6-A2-70
03005195- Cable support for P&P / C&P20 head adapter, complete
03003138- Nozzle changer, complete / P&P
03016339- Component camera, stationary, P&P (TYPE33) 55x45 digit.
00845044- DIN912-M5 x 16-8.8
03005958- DIN 913 - M 6 x 50-ST
03011722- TwinHead fixing set for HF
03006778- Hoses for TwinHead HF/X-series
03004635- Vision control unit 1, complete
03006597- HF cable: vision flash
03022077- Partition plate for fiducial, complete L600
03026079- Service nozzle set, TwinHead
00353594- Axis, KSP-A363, Smart Drive
03050239- CAN bus: IC camera
03011693- TwinHead template
00309422- DIN 913 - M 4 x 6-ST
03019633- Nozzle set, TwinHead
00066176- Packaging for 6/12 placement head
03029045- Packaging, complete, C&P20
03038412- Component camera packaging, C&P 6/12 digital
03005958- DIN 913 - M 6 x 50-ST
03015210- Plug QSC-12H
00318199- Thread lock paint, gray
00308279- Spacer bolt, type B i/a-M3x20-ST Zn
00308143- Cable clamp d=12.5mm H 7P polyamide
00343075- DIN 9021 - 3.2 - 140 HV - A2
00845014- DIN912-M3 x 8-8.8
03059912- Adapter cable, power cameras
00194474- Assembly instructions, head reconfig. kits, X-series