00194474-0702_AI_HeadReconfig_X_605_DE+EN.pdf - 第155页

Head Reconfiguration Kits 2 Assemb ly Instructions - SIPLACE X-Series Head Reconfiguration Kits 07/2010 Edition 155 2.8 Removing the C&P 6/12 placement head 2 Keep all the screws for the conversion in a suitable cont…

100%1 / 276
2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits Head Reconfiguration Kits
07/2010 Edition
154
2.6 Configuring the placement head with the machine
configuration wizard
: Start the machine configuration wizard: Start--> Programs --> Machine Configuration Wizard
or
Start SITEST and select "Settings --> Machine Configuration".
: Set the new placement head and the cameras and nozzle changers in the machine configura-
tion wizard.
: Shut down the station computer and switch off the placement machine.
2.7 Configuring the placement heads with SIPLACE
Pro
2.7.1 Configuring the placement head with SIPLACE Pro
: Enter the new placement head type, the camera type and the nozzle changer configuration for
the corresponding machine location in the "Set-up Properties" dialog.
2
: Reoptimize the set-up in SIPLACE Pro.
2
2
2
Head Reconfiguration Kits 2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits
07/2010 Edition
155
2.8 Removing the C&P 6/12 placement head
2
Keep all the screws for the conversion in a suitable container. 2
To protect the placement heads and cameras, you should always leave them in their packaging.2
: Switch the placement machine on at the main switch.
: Plug a USB stick or another suitable storage medium into the USB slot on the station computer.
2
: Save the machine data to the storage medium.
: Run the machine until it is empty and set down the nozzles.
: Dock the component trolleys out of the placement machine.
USB stick
(computer unit)
USB stick
(box PC)
2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits Head Reconfiguration Kits
07/2010 Edition
156
2.8.1 Removing the nozzle changer
: To remove the nozzle changer, please read the assembly instructions for the X series nozzle
changer (item no.:00194482-).
2
Risk of a head crash: Always run the placement heads with the appropriate nozzle changer. The
wrong nozzle changer causes a risk of a head crash. 2
2
2
On the subject of the reject bin sensor, also read the
assembly instructions for the reject bin sensor, SIPLACE HF series / X series
(item no.:00194550-). 2
2
2.8.2 Removing the C&P 6/12 placement head
2
Wear an ESD armband for the whole time you are working on the placement head and servos. 2
2
2
2
Remove the axis cards and servo cards.
Please note the overviews in the appendix Chapter 2.14.1 or Chapter 2.14.2. 2
2
2