00194474-0702_AI_HeadReconfig_X_605_DE+EN.pdf - 第167页

Head Reconfiguration Kits 2 Assemb ly Instructions - SIPLACE X-Series Head Reconfiguration Kits 07/2010 Edition 167 : Detach these hoses and th e blanking plug. 2 2 Blanking plug Hoses Pneumatic h oses for machines up to…

100%1 / 276
2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits Head Reconfiguration Kits
07/2010 Edition
166
2.9.2 Removing the TwinHead
2
Wear an ESD armband for the whole time you are working on the placement head and servos. 2
2
: Remove the blanking shield (2 screws).
2
: Detach the exhaust air hoses shown in the photograph below.
2
2 screws
Head Reconfiguration Kits 2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits
07/2010 Edition
167
: Detach these hoses and the blanking plug.
2
2
Blanking plug
Hoses
Pneumatic hoses
for machines up to
serial no. B-078
2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits Head Reconfiguration Kits
07/2010 Edition
168
: Open the strain relief clip (pushbutton).
2
: Unscrew the entire strain relief.
: Detach the four ribbon cables from the TwinHead (photograph below).
2
Plug