00194474-0702_AI_HeadReconfig_X_605_DE+EN.pdf - 第195页
Head Reconfiguration Kits 2 Assemb ly Instructions - SIPLACE X-Series Head Reconfiguration Kits 07/2010 Edition 195 : Calibrate the camera and the nozzle changer . : Carry out the mapping if necessa ry . 2 : Restart ag a…
2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits Head Reconfiguration Kits
07/2010 Edition
194
Head Reconfiguration Kits 2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits
07/2010 Edition
195
: Calibrate the camera and the nozzle changer.
: Carry out the mapping if necessary.
2
: Restart again.
2
This completes the conversion. 2
2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits Head Reconfiguration Kits
07/2010 Edition
196
2.12 Installing the TwinHead
2
Please note Chapter 2.1.4 with respect to the restrictions in the two-gantry area!
2
: Switch the placement machine off at the main power switch.
2.12.1 Installing the stationary cameras
In X-machines from serial number B325 a "CO camera, stat. P&P (TYPE33) 55x45 digit". (item
no. 03016339-), 04 is mandatory. This is already included in new orders of "TwinHead Reconfig-
uration Kits X-series" (item no. 00119721-). 2
2
There are differences when wiring the "Component camera, stat. P&P (TYPE33) 55x45 digit."
(item no. 03016339-) <= FS 03 and >= FS04. Mixing the two versions in one placement area is
not recommended and is also not described here. 2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2