00194474-0702_AI_HeadReconfig_X_605_DE+EN.pdf - 第237页
Head Reconfiguration Kits 2 Assemb ly Instructions - SIPLACE X-Series Head Reconfiguration Kits 07/2010 Edition 237 possible damage. 2 2 : Position the placement head and screw it firmly in place (4 screws). Make sure th…
2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits Head Reconfiguration Kits
07/2010 Edition
236
2
2
2
2
2
2
: Mount the cable support head adapter P&P (item no. 03005195-).
2
2
2
As you tighten the fixing screws, hold the placement head firmly to prevent it falling and thus avoid
Head adapter
board
6 screws
Head Reconfiguration Kits 2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits
07/2010 Edition
237
possible damage. 2
2
: Position the placement head and screw it firmly in place (4 screws).
Make sure that the screws are the right length and that you are using the correct torque:
DIN912 M4x14 - 8.8 (item no.: 00095021-), tightening torque: 2.7 Nm.
: Tighten the two screws on the pressure control valve.
Screws
Screws
2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits Head Reconfiguration Kits
07/2010 Edition
238
2
: Connect the plugs and attach the clip.
2
2
: Check the jumper settings on the C500 head interface board.
Tighten the screw
Attach the clip
Plug in the connec-