00194474-0702_AI_HeadReconfig_X_605_DE+EN.pdf - 第194页

2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits Head Reconfiguration Kits 07/2010 Edition 194

Head Reconfiguration Kits 2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits

07/2010 Edition

193

2.11.8 Firmware download

: Download the C&P head firmware.

Note

You can only perform a download if you have

logged in at the Service (SIPLACE) a

ccess level.

Update version

tab selected

Download

The download is started with all selected settings.

The process moves the old firmware files to the

directory C:\SRProgramme\CanFWPool, the newly

downloaded files are now located in the directory

C:\SRProgramme\CanFW.

Target

Application 1/2

When activated, the firmware that controls the

actions of the subsystem is loaded.

BIOS

When activated, the operating system for the

subsystems is loaded.

Subsystem

Machine components

Current version

Firmware version available on the individual machine

components.

Download version

Version that can be loaded. This is located in the directory

C:\SRProgramme\CanFW.

Info

Additional information, for example, about the hardware status

of the various machine components.

Check

Reads the current firmware version from the subsystems.

These versions are stored in the directory

C:\SRProgramme\CanFW. This directory may contain a

maximum of one version for each of the subsystems. If there

are a number of versions available for a subsystem, one of

these versions must be moved into the directory

C:\SRProgramme\CanFWPool. If you do not do so, an error

message will be issued as a result of a conflicting version, and

the download cannot be executed.

Subsystem

Here you can select the subsystems.

Select the subsystem for which the download is to be

performed.

All

All subsystems are activated.

Reset

All components are deactivated.

All axes

All axes are activated.

2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits Head Reconfiguration Kits

07/2010 Edition

194

Head Reconfiguration Kits 2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits

07/2010 Edition

195

: Calibrate the camera and the nozzle changer.

: Carry out the mapping if necessary.

: Restart again.

This completes the conversion. 2