182050 User manual.pdf - 第109页
semi automatic 0$&+,1 (352*5 $00,1 * 67$786 3$*( Software Version 07SP02 User Manual 1.99 Info rma tion Windows Three infor mation windows are displayed on the st atus page as foll ows: • Pri nter - St atus • Proc …
semi automatic
0$&+,1(352*5$00,1*
67$7863$*(
1.98 User Manual Software Version 07SP02
STATUS PAGE
The information displayed on the main control monitor is shown on the status
page.
Display
semi automatic
0$&+,1(352*5$00,1*
67$7863$*(
Software Version 07SP02 User Manual 1.99
Information
Windows
Three information windows are displayed on the status page as follows:
• Printer - Status
• Process - Parameters
• Rates
Printer - Status The following table lists all the items that can be displayed in the Printer - Status
information panel:
The Printer - Status panel can display up to a maximum of 14 items.
Process -
Parameters
The following table lists all the items displayed in the Process - Parameters
information panel:
The Process - Parameters panel can display up to a maximum of 6 items.
The values of the Process - Parameters are set in the product file of the loaded
product.
Item Description
Status The printers current status is displayed. Options are:
Maintenance; Operator Active; Ready; Machine Set Up.
Mode Displays the current mode of operation of the printer. Options are:
Step - The printer operates one step at a time;
Auto - The printer completes a print cycle and displays the message
‘Remove the Completed Board’;
Single - The printer prints the board but leaves the board at the print station;
SPC Mode - The printer cycles boards in and out of the printer, continuously.
Product Displays the current product loaded onto the printer.
SW Version Displays the version of software currently loaded on the printer.
Print Mode
Front Print Speed
Rear Print Speed
Front Pressure
Rear Pressure
Separation Speed
semi automatic
0$&+,1(352*5$00,1*
67$7863$*(
1.100 User Manual Software Version 07SP02
Rates The following table lists all the items that can be displayed in the Rates
information panel:
The Rates panel can display up to a maximum of 6 items.
Item Description
Batch Count/
Limit
The first figure displays the amount of boards printed in the current batch.
The second figure displays the total amount of boards to be printed in the
current batch. The batch count limit is set in Batch Limit in the Monitor
menu.
Board Count/
Limit
The first figure displays the amount of boards printed in the current board
count. The second figure displays the total amount of boards to be printed
in the current board count. The board count limit is set in Board Count in
the Edit Data menu. The board count limit allows a separate board count
to be set within the total batch count.
Paste Disp. Cnt/
Rate
The first figure displays the amount of boards printed since the last paste
dispense. The second figure displays the amount of boards to be printed
between each paste dispense. The paste dispense count/rate is set in
Paste Dispense Rate in the Edit Data menu.
Clean 1 Count/
Rate
The first figure displays the amount of boards printed since the last screen
clean mode 1 was carried out. The second figure displays the amount of
boards to be printed between each screen clean mode 1. The clean 1 count/
rate is set in Screen Clean Rate 1 in the Edit Data menu. This parameter
is only displayed while a blue or silver under screen cleaner is fitted.
Print Direction Displays the print direction for the next board to be printed.