182050 User manual.pdf - 第146页
semi automatic ',$*126 7,&6 6&5((1 &+$1 *( 4.24 User Manual Software Ve rsion 07SP02 SCREEN CHANGE Selectin g this diagnos tics modul e opens the fol lowing wi ndow: The menu bar changes to the followin…
semi automatic
',$*1267,&6
6&5((1$/,*10(17
Software Version 07SP02 User Manual 4.23
Drive Y Motor
Using Jog Buttons
Selecting this diagnostic function drives the Y actuator using the jog buttons.
The right jog button drives the Y actuator forward at slow speed and the left jog
button drives it to the rear, stopping immediately the button is released.
Toggle Chase
Clamp
Selecting this diagnostic function alternately energizes and de-energizes the
chase clamp solenoid, displaying On when the clamps are energized and Off
when the clamps are de-energized.
Cycle Alignment
System
Selecting this diagnostic function starts a continuous cycle of driving the screen
actuators to each of the positions in the table below in sequence, dwelling for 2
seconds at each point and continuing the cycle.
The positions are given as XF, XR and Y in mm from the home position and are
as follows:
This continuous cycling is terminated by selecting the stop key or when the set
cycle count has been reached.
Cycle Count This diagnostic function displays the amount of cycles done and the amount of
cycles to go to complete the cycle count.
1 0, 0, 0.
2 +20, +10, +10.
3 0, 0, 0.
4 -20, -10, -10.
5 0, 0, 0.
6 +10, +20, -10.
7 0, 0, 0.
8 -10, -20, +10.
semi automatic
',$*1267,&6
6&5((1&+$1*(
4.24 User Manual Software Version 07SP02
SCREEN CHANGE
Selecting this diagnostics module opens the following window:
The menu bar changes to the following:
Next / Previous keys have no function in this application.
Run Diagnost activates the toggle screen clamps diagnostic function.
Exit returns operation to the module diagnostics page.
Toggle Screen
Clamps
Selecting this diagnostic function alternately energizes and de-energizes the
screen clamps, displaying ‘On’ when energized and ‘Off’ when de-energized,
(not used on this machine).
Screen Sensor This diagnostic function continuously displays the status of the screen sensor.
Screen Change Diagnostics
OFF
Toggle Screen Clamps
Screen Sensor
ON
Run
Diagnost
Next Previous Exit
semi automatic
',$*1267,&6
6&5((1&/($1(5
Software Version 07SP02 User Manual 4.25
SCREEN CLEANER
Selecting this diagnostics module opens the following window:
The menu bar changes to the following:
Next / Previous keys move the highlight bar up and down the list of selectable
diagnostic functions.
Run Diagnost activates the diagnostic function, as selected by the highlight
bar.
Exit returns operation to the module diagnostics page.
Adjust opens the following window:
The menu bar changes to the following:
Incr. / Decr. keys change the value of the cycle count.
Exit returns operation to the screen cleaner diagnostics page.
Toggle Dry Wipe
Blade
Selecting this diagnostic function raises and lowers the cleaner body assembly,
displaying On when the cleaner body assembly is raised and Off when the
cleaner body assembly is lowered.
Screen Cleaner Diagnostics
ON
Cleaner Paper Low/Advance
Cleaner Solvent Low
Pinch Valve Fitted
ON
OFF
Toggle Pinch Valve (if fitted)
Toggle Paper Feed
Toggle Vacuum
Toggle Solvent Feed/Tank Press
Toggle Screen Cleaner Home Clamp
Cycle Pinch Valve
Cycle Clean Blade
Toggle Dry Wipe Blade
Cycle Count
Done :-
0, To go :-
50
OFF
OFF
OFF
OFF
ON
ON
OFF
Run
Diagnost
Adjust Next Previous Exit
Cleaner Cycle Parameters
CYCLE COUNT
50.0
Cycles
Incr. Decr. Exit