182050 User manual.pdf - 第124页

semi automatic ',$*126 7,&6 6<67(0 4.2 User Manual Software Version 0 7SP02 SYSTEM Selectin g this di agnostic mod ule opens the f ollowing wind ow: The menu bar changes displaying the f ollowing: Next / Prev…

100%1 / 266
semi automatic
',$*1267,&6
,1752'8&7,21
Software Version 07SP02 User Manual 4.1
CHAPTER 4 DIAGNOSTICS
INTRODUCTION
The diagnostic function is an aid to the user to allow individual access and
control of motors and modules. It allows the user to control the sequence of the
machine so that a particular module can be exercised.
To enter the diagnostic mode press the Maint button.
The menu bar changes displaying the Diagnostic option.
Press the Diagnost (F6) button. If a password exists a window displays the
message ‘Diagnostic Password’. If the password is incorrect control displays
the message‘Invalid password entered’ and returns to the previous menu. If
the correct password is entered or no password exists a pop up window displays
the following:
The menu bar changes displaying the following:
Next / Previous keys move the highlight bar up and down the list of diagnostic
modules.
Select Module key opens a new window displaying the diagnostic functions
available for the selected module.
Exit returns operation to the start of initialization.
NOTE
Before any diagnostic function is used in any of the modules they must be
homed first or they are not able to initiate a command.
Run
Open
Cover
Paste
Load
Clean
Screen
Setup Monitor Maint.
Calibrat
Pressure
Calibrat
Offset
Calibrat
Vision
House
Keeping
Set
Prefs
Diagnost
Te st
Cycles
Exit
Module Diagnostic Page
System
Print Carriage
ProFlow / Squeegee
Camera Axes
Rail System
Paste Dispense System
Screen Alignment
Screen Change
Screen Cleaner
Rising Table
Select
Module
Next Previous Exit
semi automatic
',$*1267,&6
6<67(0
4.2 User Manual Software Version 07SP02
SYSTEM
Selecting this diagnostic module opens the following window:
The menu bar changes displaying the following:
Next / Previous keys move the highlight bar up and down the list of selectable
diagnostic functions.
Run Diagnost activates the diagnostic function, as selected by the highlight
bar.
Exit returns operation to the module diagnostic page.
Display All Digital
Inputs
Selecting this diagnostic function opens the following window:
The menu bar changes displaying the following:
Next / Previous keys move the highlight bar up and down the list of diagnostic
modules.
Select key opens a new window displaying the diagnostic functions available
for the selected option.
Exit returns operation to the system diagnostics page.
System Diagnostics
OFF
Display all Digital Inputs
Display all Analogue Inputs
Toggle Lid Bolt
Change Edit Password
Change Diagnostics Password
Change Terminate Password
Change Fiducial Set-Up Password
Change Maintenance Password
Terminate Control Program
Run
Diagnost
Next Previous Exit
Digital Group
NM 1 Group 0
NM 1 Group 1
NM 1 Group 2
NM 1 Group 3
NM 1 Group 4
MMOV 1 Group 0
MMOV 1 Group 1
MMOV 1 Group 2
MMOV 1 Group 3
MMOV 2 Group 0
MMOV 2 Group 1
MMOV 2 Group 2
MMOV 2 Group 3
Select Next Previous Exit
semi automatic
',$*1267,&6
6<67(0
Software Version 07SP02 User Manual 4.3
NM1 is a NextMove I/O card that is housed in the PC. The MMOV1 and MMOV
2 are MultiMove I/O cards that are housed in the machine controller enclosure.
NextMove cards have up to five groups, G0 - G4 and MultiMove cards four
groups, G0 - G3. The NextMove and MultiMove cards monitor and control
various drives and control cards in the machine controller enclosure.
NOTE
The signal listings, shown on the right hand side of the following diagnostic
windows, are not shown on the MMI screen, they are included here as an aid
to show the relationship between the I/O signal and the point description.
NM1 Group 0
NM1 Group 1
NM1 Group 2
NM 1 Group 0
Point Description
---------------------
---------
-------
Bit No
Sense
-----------
------
Direction
State
Table HOME
Table LIMIT
Table at Home
Rail Lifted Left
Rail Lifted Right
Camera X HOME
Print Carriage HOME
Servo Amp error
0
1
2
3
4
5
6
7
Positive
Positive
Negative
Negative
Negative
Positive
Positive
Positive
Input
Input
Input
Input
Input
Input
Input
Input
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
DIG IN 0
DIG IN 4
DIG IN 1
Signal
DIG IN 5
DIG IN 6
DIG IN 2
DIG IN 3
DIG IN 7
NM 1 Group 1
Point Description
---------------------
---------
-------
-----------
------
Bit No
Sense
Direction
State
X Rear INDEX
X Rear HOME
X Forward INDEX
X Forward HOME
Y Actuator INDEX
Y Actuator HOME
MUX HOME
Camera Y HOME
0
1
2
3
4
5
6
7
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Input
Input
Input
Input
Input
Input
Input
Input
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
DIG IN 8
DIG IN 12
DIG IN 9
Signal
DIG IN 13
DIG IN 14
DIG IN 10
DIG IN 11
DIG IN 15
NM 1 Group 2
Point Description
---------------------
---------
-------
-----------
------
Bit No
Sense
Direction
State
Board At Left
Board At Right
Not Used
Not Used
Not Used
Not Used
Board At Stop
Board Stop In
0
1
2
3
4
5
6
7
Negative
Negative
Positive
Positive
Positive
Positive
Negative
Negative
Input
Input
Input
Input
Input
Input
Input
Input
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
DIG IN 16
DIG IN 20
DIG IN 17
Signal
DIG IN 21
DIG IN 22
DIG IN 18
DIG IN 19
DIG IN 23