182050 User manual.pdf - 第207页
semi automatic ',163(& 7,21 0(18 3$5$ 0(7 (56 Software Version 07SP02 User Manual 7.33 Board V ertical This parameter set s the level of board vertical light. Limit Set Options This parameter enables/di sable…
semi automatic
',163(&7,21
0(183$5$0(7(56
7.32 User Manual Software Version 07SP02
Paste Warning This parameter sets the amount of paste on pad required to initiate a warning.
Paste Alarm This parameter sets the amount of paste on pad required to initiate an alarm.
Board Graphic X The position of the inspection window on the board side. This parameter is used
to finely adjust the inspection window in the X direction.
Board Graphic Y The position of the inspection window on the board side. This parameter is used
to finely adjust the inspection window in the Y direction.
Window Left This parameter sets the position of the histogram window relative to the centre
of the image.
The Minimum and Maximum values are calculated from the vision calibration
and vary from machine to machine. Increments - 0.1mm.
Window Top This parameter sets the position of the histogram window relative to the centre
of the image.
The Minimum and Maximum values are calculated from the vision calibration
and vary from machine to machine. Increments - 0.1mm.
Window Width This parameter sets the width of the histogram window.
The Minimum and Maximum values are calculated from the vision calibration
and vary from machine to machine. Increments - 0.1mm.
Window Height This parameter sets the height of the histogram window.
The Minimum and Maximum values are calculated from the vision calibration
and vary from machine to machine. Increments - 0.1mm.
Screen Vertical This parameter sets the level of stencil vertical light.
Minimum Maximum Increments
0% 100% 1%
Minimum Maximum Increments
0% 100% 1%
Minimum Maximum Increments
-3.5mm 3.5mm 0.01mm
Minimum Maximum Increments
-3.5mm 3.5mm 0.01mm
Minimum Maximum Increments
0151
semi automatic
',163(&7,21
0(183$5$0(7(56
Software Version 07SP02 User Manual 7.33
Board Vertical This parameter sets the level of board vertical light.
Limit Set Options This parameter enables/disables the paste alarm action.
Minimum Maximum Increments
0151
semi automatic
',163(&7,21
0(183$5$0(7(56
7.34 User Manual Software Version 07SP02