00197463-03_SM_CPP_Customer_EN.pdf - 第57页
5 Front plate, star, Z axis and smoothed distributor disc 5.5 Replacing the Single Core Solution (SCS)[03054790Sxx] (only for heads fromFS05) Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018 57 Fig.88: Connecting…
5 Front plate, star, Z axis and smoothed distributor disc
5.5 Replacing the Single Core Solution (SCS)[03054790Sxx] (only for heads fromFS05)
56 Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018
Installation
Fig.85: Inserting the SCS
► Carefully insert the new SCS.
Make sure that the pin(1) in the SCS is correctly
positioned in the hole(2) in the bottom part.
Also pay attention to the correct connection of the
Flexprint cable(3) to the relevant connector.
Fig.86: Connecting the plugs
► Attach the connectors(1) of all twelve DP drives
to the SCS.
Press the connector into position with your finger,
until the connector engages.
You can also lift the SCS slightly, if needed.
CAUTION!
Take care not to damage the Flexprint cable
for the DP drives.
.
Fig.87: Fastening the SCS
► Fasten the SCS with three screws.
Torque: 0.4Nm
5 Front plate, star, Z axis and smoothed distributor disc
5.5 Replacing the Single Core Solution (SCS)[03054790Sxx] (only for heads fromFS05)
Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018 57
Fig.88: Connecting the Flexprint cable
► Place the white mat(1) into the SCS recess, un-
der the Flexprint cable.
CAUTION!
Pay attention to the correct installation posi-
tion of the white mat(1).
.
► Insert the Flexprint cable contact shoe into the
connector(2) and lock it.
Fig.89: Fitting the strain relief
► Fit the strain relief for the Flexprint cable.
Hand-tighten the screw.
CAUTION!
Pay attention to the correct installation posi-
tion of the mat(1) and the cover (2).
.
Fig.90: Fastening the connector with screws
► For all twelve drives: fit both screws(1), which
fasten the connectors to the Flexprint cables on
the SCS.
Torque: 0.1Nm
► Follow the removal instructions in reverse order for further installation.
Also observe the installation instructions in the following sections:
8.4 "Replacing the holding circuit" [}101]
5.2 "Removing and fitting the star (only for heads from FS05 upwards)" [}43]
5.1 "Replacing the front plate [03061102-xx]" [}35]
► Observe in particular the torques specified!
5 Front plate, star, Z axis and smoothed distributor disc
5.5 Replacing the Single Core Solution (SCS)[03054790Sxx] (only for heads fromFS05)
58 Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018
5.5.1 Power module for 12 DP drives [03054771‑xx]
Overview
Fig.91: 03054771-02
LED [03054771-02]
LED Color Status Function LED Color Status Function
H1 RD See status
table
DP1 H15 RD See status
table
DP8
H2 GN H16 GN
H3 RD See status
table
DP2 H17 RD See status
table
DP9
H4 GN H18 GN
H5 RD See status
table
DP3 H19 RD See status
table
DP10
H6 GN H20 GN
H7 RD See status
table
DP4 H21 RD See status
table
DP11
H8 GN H22 GN
H9 RD See status
table
DP5 H23 RD See status
table
DP12
H10 GN H24 GN
H11 RD See status
table
DP6 H25 GN ON +24VDC
H12 GN H26 GN ON +5VDC
H13 RD See status
table
DP7 H27 GN ON +3.3VDC
H14 GN