00197463-03_SM_CPP_Customer_EN.pdf - 第70页

5 Front plate, star, Z axis and smoothed distributor disc 5.7 Replacing the energy transmission for the stator [03068842‑xx] (only for heads fromFS05) 70 Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018

100%1 / 120
5 Front plate, star, Z axis and smoothed distributor disc
5.7 Replacing the energy transmission for the stator [03068842‑xx] (only for heads fromFS05)
Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018 69
Fig.108: Cover and cable ties
► Fix the cover(2) into place with four fastening
screws(1).
► Follow the removal instructions in reverse order for further installation.
Also observe the installation instructions in the following sections:
5.3 "Replacing the smoothed distributor disc [03055431-xx]" [}47]
5.2 "Removing and fitting the star (only for heads from FS05 upwards)" [}43]
5.1 "Replacing the front plate [03061102-xx]" [}35]
► Observe in particular the torques specified!
5 Front plate, star, Z axis and smoothed distributor disc
5.7 Replacing the energy transmission for the stator [03068842‑xx] (only for heads fromFS05)
70 Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018
6 DP drives
6.1 Replacing the DP drives
Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018 71
6 DP drives
6.1 Replacing the DP drives
Parts, equipment and tools
●
Select the correct DP drive:
– CPP: DP drive assembly (incl. 3 screws, without linear guide) [03050314-xx]
– CPP M: DP drive assembly – CPPM [03153724‑xx]
Overview
Fig.109: DP drive
1. The connector is connected and screwed to the
SCS control unit.
2. Motor
3. Fixture surface for screwing the linear guidance
into place
4. Vacuum connection.
5. Measuring system
Resolution: 278digitsperdegree or
100,000digitsperrevolution
6. Protective cap
7. Nozzle interface
Preparation
► Remove the head from the machine. For details about removing and fitting the placement
head, refer to the service manual for your machine.
fit the head on the head mount [03056231‑xx].
► Make sure that the component sensor protective cap is fitted.
1.1.3 "Protecting the component sensor" [}8]