00197463-03_SM_CPP_Customer_EN.pdf - 第63页
5 Front plate, star, Z axis and smoothed distributor disc 5.6 Replacing the energy transmission for the rotor [03068843‑xx] Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018 63 5.6 Replacing the energy transmission …
5 Front plate, star, Z axis and smoothed distributor disc
5.5 Replacing the Single Core Solution (SCS)[03054790Sxx] (only for heads fromFS05)
62 Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018
Status 7-segment display on the SCS
State Display Comment Possible troubleshoot-
ing solutions
During download E (E)rase, memory will be deleted No error
P (P)rogramming, memory is be-
ing written
No error
Rotating Memory is being loaded No error
BIOS | Waiting for baud rate detection No error
0 Initialization No error
b (B)ios, no application Bootphase Bios
→ no error
A Application has been started No error
ERR1 HW error IRAM Hardware error
→ replace assembly
ERR2 HW error XRAM
ERR3 HW error CHKS
ERR4 HW error RAM
B(flash-
ing).
No application Load application
|-(flash-
ing)-|
Waiting period before jump to
the application,
almost 0 for SCS - due to fast
boot
No error
Application 0 Check FPGA und DSP code No error
8 Download machine data to ap-
plication 2
No error
. (flash-
ing)
Normal status No error
User defined errors
(three-digit number shown
sequentially)
081 Too many friends Incorrect addressing by
SIRIO
→ error message with
bug report
082 Unknown GSM
083 Communication error
097 CAN_ID already exist
098 CAN_ID already initialized
099 GSM initialization error
100 CAN-ID is too big
101 Wrong CAN ID
102 Wrong number of subsystems
OSE error
(three-digit number shown
sequentially)
001 - 079 Operating system error
→ error message with
bug report
5 Front plate, star, Z axis and smoothed distributor disc
5.6 Replacing the energy transmission for the rotor [03068843‑xx]
Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018 63
5.6 Replacing the energy transmission for the rotor
[03068843‑xx]
Parts, equipment and tools
●
Energy transmission for rotor assembly CPP [03068843‑xx]
Overview
Fig.93: Star structure
1. Energy transmission for rotor
2. Valve terminal
3. Star carrier with DP drives
4. Single Core Solution (SCS).
5. Holding circuit with screwed joint
Fig.94: Energy transmission for rotor (front and back)
Energy transmission for rotor assembly CPP
[03068843‑xx]
Preparation
► Remove the head from the machine. For details about removing and fitting the placement
head, refer to the service manual for your machine.
fit the head on the head mount [03056231‑xx].
► Make sure that the component sensor protective cap is fitted.
1.1.3 "Protecting the component sensor" [}8]
5 Front plate, star, Z axis and smoothed distributor disc
5.6 Replacing the energy transmission for the rotor [03068843‑xx]
64 Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018
Removal (for heads from version 05)
► If required, dismantle the front plate.
5.1 "Replacing the front plate [03061102-xx]" [}35]
► Remove the star.
5.2 "Removing and fitting the star (only for heads from FS05 upwards)" [}43]
Fig.95: Fastening screws for "energy transmission for rotor"
► Remove the six screws fastening the "energy
transmission for the rotor".
Fig.96: Removing the "energy transmission for the rotor"
► Remove the "energy transmission for the rotor".